User Manual

61
Chapter 11
Manage the Router
3. Enter the old password, then a new password twice (both case-sensitive). Click Save.
4. Use the new password for future logins.
11. 7. Local Management
Local Management allows local devices to access and manage the router. By default, all
local devices can access and manage the router via HTTP.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools > Administration and complete the settings In Local Management
section as needed.
3. Enable Local Management via HTTPS if you want to access the router via both HTTPS
and HTTP, or keep it disabled if you only want to access the router via HTTP.
4. Keep the Port for HTTP and Port for HTTPS as the default settings.
5. If you only want to allow one specific device to manage the router, enter the IP Address
or MAC Address of the device in the
IP/MAC Address field.
6. Click
Save.
Note: If a warning pops up when you visit https://tplinkwifi.net, click Trust (or a similar option) to continue.