User Manual

62
Chapter 11
Manage the Router
11. 8. Remote Management
Remote Management allows remote devices to access and manage the router. By
default, all remote devices cannot access and manage the router.
1. Visit
http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools > Administration and complete the settings in Remote
Management
section as needed.
3. Enable Remote Management if you want to allow Remote Management via HTTPS, or
enable
Remote Management and then disable Remote Management via HTTPS if you
want to allow Remote Management via HTTP.
4. Keep the Port as the default setting.
5. Decide which remote device can access the router remotely:
•
Only the Following IP/MAC Address - Enter the IP Address or MAC Address of
the remote device to access the router.
•
All - All remote devices can access the router.
6. Click
Save.
Note: If a warning pops up when you visit the above address remotely, click Trust (or a similar option) to continue.
11. 9. System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.
¾ To save the system log locally:
1. Visit
http://tplinkwifi.net, and log in the password you set for the router.
2. Go to System Tools > System Log.