User Guide

TL-MR3040 Portable Battery Powered 3G/4G Wireless N Router
-189-
4) Bridge with AP: This mode can bridge the AP and up to 4 APs also in bridge mode to
connect two or more wired LANs.
Figure 6-12 Wireless Settings in Bridge with AP mode
¾ Wireless Network Name (also called SSID) - Identifies your wireless network name. Create
a name and make sure all wireless points in the wireless network with the same SSID. The
default SSID is TP-LINK_MR3040_XXXXXX (XXXXXX indicates the last unique six
characters of each device’s MAC address). This value is case-sensitive. For example, TEST
is NOT the same as test.
¾ Region - Select your region from the pull-down list. This field specifies the region where
the wireless function of the device can be used. It may be illegal to use the wireless
function of the device in a region other than one of those specified in this field. If your
country or region is not listed, please contact your local government agency for
assistance.
When you select your local region from the pull-down list, click the Save button, then the
Note Dialog appears. Click OK.
Note Dialog