Manual

Powerline

Quick Installation Guide

More: To add additional Powerline

devices with the default settings, simply

plug them into the wall sockets on the

same electrical circuit.

Adapter

Applicable to TL-PA4010, TL-PA411, and their multiple-pack kits

AV500 Nano Powerline Adapter

7106505257 REV2.0.0

Plug and Play

Router

WAN LAN

Enjoy!

Wait until the Powerline

LED turns on.

Attention

Power Strip

Wall Outlet

* This QIG uses TL-PA4010KIT(EU) as an example.

PAGE 1
Quick Installation Guide AV500 Nano Powerline Adapter Applicable to TL-PA4010, TL-PA411, and their multiple-pack kits * This QIG uses TL-PA4010KIT(EU) as an example. 7106505257 REV2.0.0 Adapter 3 Wait until the Powerline LED turns on. More: To add additional Powerline devices with the default settings, simply plug them into the wall sockets on the same electrical circuit.
PAGE 2
Set Up a Secure Powerline Network by Pairing (Recommended) You can use the Pair button on two devices at a time to create or join a secure powerline network. To join an existing secure powerline network: To create a secure powerline network: 1 Press the Pair button on one adapter. 2 Press the Pair button on another adapter. 3 Done. 1 Press the Pair button on any powerline adapter in the existing powerline network. 2 Press the Pair button on the new adapter. On Blinking 3 Done.