Quick Start Guide

Router

WAN LAN

Adapter

TL-PA7017

Adapter

TL-PA7017

More: To add additional Powerline

adapters and extenders with the default

settings, simply plug them into the wall

sockets on the same electrical circuit.

Same Electrical Circuit

Wait until the Powerline LED turns on.

Note: If the LED is o, please refer to FAQ-Q2.

Attention

Wall Outlet Power Strip

Plug powerline devices into wall outlets instead of power strips.

Quick Installation Guide

* TL-PA7017 KIT (European version) is used for demonstration in this guide.

* Images may dier from your actual product.

PAGE 1
it Quick Installation Guide lec E me Sa u irc C l a tric * TL-PA7017 KIT (European version) is used for demonstration in this guide. * Images may differ from your actual product. Wait until the Powerline LED turns on. lec E me Sa Adapter TL-PA7017 N LA Router N WA 1 2 irc al C tric Note: If the LED is off, please refer to FAQ-Q2.
PAGE 2
Set Up a Secure Powerline Network by Pairing (Recommended) Physical Appearance You can create or join a secure powerline network using the Pair button on two devices at a time. Tip: We recommend that you plug in the powerline devices near each other when pairing. To create a secure powerline network: 1 Press the Pair button on any of the powerline devices for 1 second. Its Power LED should start blinking.