Installation Manual

Router

WAN LAN

More: To add additional Powerline

adapters and extenders with the default

settings, simply plug them into the wall

sockets on the same electrical circuit.

Adapter

TL-PA7017P

Adapter

TL-PA7017P

* Applicable to TL-PA7017P and its multiple-pack kits.

* TL-PA7017P KIT (European version) is used for demonstration in this guide.

Images may dier from your actual product.

Quick Installation Guide

Same Electrical Circuit

Attention

Wall Outlet Power Strip

Plug powerline devices into wall outlets instead of power strips.

Wait until the Powerline LED turns on.

Note: If the LED is o, please refer to FAQ-Q2.

PAGE 1
it Quick Installation Guide lec E me Sa u irc C l a tric * Applicable to TL-PA7017P and its multiple-pack kits. * TL-PA7017P KIT (European version) is used for demonstration in this guide. Images may differ from your actual product. Wait until the Powerline LED turns on. m eE Sa Adapter TL-PA7017P N LA Router N WA 1 l ica tr lec uit c Cir Note: If the LED is off, please refer to FAQ-Q2.
PAGE 2
Set Up a Secure Powerline Network by Pairing (Recommended) Physical Appearance You can create or join a secure powerline network using the Pair button on two devices at a time. Tip: We recommend that you plug in the powerline devices near each other when pairing. Integrated Electrical Socket To create a secure powerline network: Power LED Powerline LED Ethernet LED 1 Press the Pair button on one of the powerline devices for 1 second. Its Power LED should start blinking.