User Guide AV1000 Gigabit Passthrough Powerline Adapter TL-PA7017P REV4.0.
Contents About This Guide 1 Chapter 1 2 1. 1. 1. 2. Product Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Product Appearance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 2 2. 1. 2. 2. 2. 3. 2. 4. 2. 5. Get to Know Your Powerline Adapter Use Your Powerline Adapter 5 Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
About This Guide This guide is a complement to Quick Installation Guide. The Quick Installation Guide provides instructions for quick internet setup, while this guide contains details of each function and demonstrates how to configure them in typical scenarios. When using this guide, please notice that features of the powerline adapter may vary slightly depending on the model and software version you have. The powerline adapter availability may also vary by region or ISP.
Chapter 1 Get to Know Your Powerline Adapter This chapter introduces what the powerline adapter can do and describes its appearance.
Chapter 1 1 1 Get to Know Your Powerline Adapter Product Overview TP-Link powerline adapter aims to extend your existing home network, with the help of your home’s electrical circuit. The integrated power socket on the powerline adapter provides an outlet for other electronic devices. Its built-in noise filter eliminates electrical signal noise and therefore guarantees the high quality transmission of data via powerline.
Chapter 1 Get to Know Your Powerline Adapter Name Status Ethernet Indication On The Ethernet port is connected. Off The Ethernet port is not connected. *Five minutes after the device connected to the powerline adapter is turned off or inactive, the powerline adapter will automatically switch to Power-Saving Mode.
Chapter 2 Use Your Powerline Adapter This chapter guides you on how to use the powerline adapter.
Chapter 2 2 1 Use Your Powerline Adapter Before You Start Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles: • All powerline adapters should be on the same electrical wiring system. • Avoid plugging in powerline adapters and high-powered household devices (such as washing machines and refrigerators) close to one another.
Chapter 2 2 2 Use Your Powerline Adapter Extend Your Wired Network by Plug & Play I want to: Use two powerline adapters to set up a new powerline network in my house. For example, I have a router in my house, but there are not enough LAN ports for all my wired devices. I don’t want complex and expensive cabling. People told me that I can solve this problem with two powerline adapters.
Chapter 2 Use Your Powerline Adapter own powerline adapters, you should pair them. Thus a secured powerline network is formed and other powerline adapters can no longer join your powerline network without being paired. Note: You can only pair two devices at a time. I want to: Secure my powerline network and prevent other powerline devices from being added to my network. For example, I’ve extended my network using the Plug & Play method. Now I want to secure my network.
Chapter 2 Use Your Powerline Adapter For example, I’ve already set up a powerline network using powerline devices, but the network does not reach everywhere I need it to. I purchased another one to further extend my network. How can I do that? 1 Plug the new powerline adapter into a wall outlet near one of the existing powerline devices. it u irc al C tric lec E me Sa it u irc al C tric lec E me Sa 2 Press the Pair button on any of the existing powerline devices for 1 second.
Chapter 2 Use Your Powerline Adapter Done! Enjoy the internet through your extended network! 2 5 Manage Your Powerline Network via tpPLC Utility The tpPLC utility enables you to view and manage your TP-Link powerline network. Its bold and intuitive interface helps you easily configure each powerline device. You can find the utility and its user guide on the product support page at https://www.tp-link.com/en/support/download/.
FAQ (Frequently Asked Questions) Q1 How do I reset my powerline adapter? With the powerline adapter plugged into the wall socket, press and hold its Pair button for more than 6 seconds until the Power LED goes off momentarily and comes back on. Q2 What should I do if the Powerline LED is off? • Try another wall socket and make sure all powerline devices are on the same electrical circuit. • Try to set up a powerline network by pairing. Refer to Secure Your Powerline Network by Pairing for instructions.
COPYRIGHT & TRADEMARKS is a registered Specifications are subject to change without notice. trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2020 TP-Link Technologies Co., Ltd.
FCC compliance information statement Product Name: AV1000 Gigabit Passthrough Powerline Adapter Model Number: TL-PA7017P Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
is no unauthorized change is made in the equipment and the equipment is properly maintained and operated. Issue Date: 2020.02.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863. The original EU declaration of conformity may be found at https://www.tp-link.
•• 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 •• 請不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 產品元件名 稱 PCB 外殼 電源供應板 鉛 Pb ○ ○ — 鎘 Cd ○ ○ ○ 限用物質及其化學符號 汞• Hg ○ ○ ○ 六價鉻• CrVI ○ ○ ○ 多溴聯苯 PBB ○ ○ ○ 多溴二苯醚 PBDE ○ ○ ○ 備考 1.•" 超出 0.1wt%" 及 " 超出 0.01wt%" 系指限用物質之百分比含量超出百分比含量基準值。 備考 2.•" ○ " 系指該項限用物質之百分比含量未超出百分比含量基準值。 備考 3.
Explanation of the symbols on the product label Symbol Explanation AC voltage DC voltage Indoor use only Functional earth wiring terminals only Warning electric shock Fuse is used in neutral N RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.
