User Manual

8
Chapter 2 Use Your Powerline Adapter
own powerline adapters, you should pair them. Thus a secured powerline network is
formed and other powerline adapters can no longer join your powerline network without
being paired.
Note: You can only pair two devices at a time.
I want to:
Secure my powerline network and prevent other powerline devices from being added
to my network.
For example, I’ve extended my network using the Plug & Play method. Now I want to
secure my network.
How can I do that?
1. Verify all powerline devices’ Power LEDs
are solid on.
Tips: We recommend that you plug in your powerline devices next to each other, or as close to each
other as possible when pairing. Your settings will not be affected. The devices can be relocated to where
they are needed once pairing is complete.
2. Press the Pair button on any of the powerline devices for 1 second. Its Power LED
should start blinking.
3. (Within 2 minutes) Press the Pair button on another device for 1 second. Its Power
LED should start blinking. When the Powerline LED lights up, a powerline
network has been successfully created.
6
within 2 minutes
pairpair
Blinking
On
Blinking
pair
Done!
Enjoy your secure powerline network!
2. 4. Add Another Powerline Adapter
I want to:
Add a new powerline adapter into the existing powerline network to extend my network.