Installation Manual

Powerline

Quick Installation Guide

TL-PA9020P

Applicable to TL-PA9020P and its multiple-pack kits

AV2000 2-port Gigabit Passthrough Powerline Adapter

7106505830 REV1.0.1

Plug and Play

Router

WAN LAN

Enjoy!

Attention

Wait until the powerline

LED turns on.

Pair

*TL-PA9020P (European version) is used for demonstration in this QIG.

More: To add additional Powerline adapters

and extenders with the default settings,

simply plug them into the wall sockets on the

same electrical circuit.

Power Strip

Wall Outlet

PAGE 1
Quick Installation Guide AV2000 2-port Gigabit Passthrough Powerline Adapter Applicable to TL-PA9020P and its multiple-pack kits Pair *TL-PA9020P (European version) is used for demonstration in this QIG. TL-PA9020P 7106505830 REV1.0.1 3 Wait until the powerline LED turns on. More: To add additional Powerline adapters and extenders with the default settings, simply plug them into the wall sockets on the same electrical circuit.
PAGE 2
Set Up a Secure Powerline Network by Pairing (Recommended) You can create or join a secure powerline network using the Pair button on two devices at a time. Tips: We recommend that you plug in the powerline devices near each other when pairing. To create a secure powerline network: A 2 Within 2 minutes, press the Pair button for 1 second. 3 Done. B Pair Pair Pair DESCRIPTION The powerline adapter is on or off. Once every second: Pairing is in process.