User Guide TL-POE150S PoE Supplier Adapter Rev:1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2008 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENTS Package Contents...........................................................................1 Chapter 1. Introduction ............................................................1 1.1 Overview of the production .......................................1 1.2 Features ....................................................................2 Chapter 2. Identifying External Components .........................2 Chapter 3. Connecting the PoE Supplier Adapter...................
Package Contents The following items should be found in your package: ¾ TL-POE150S PoE Supplier Adapter ¾ One Power Adapter ¾ One Power Cable ¾ One Ethernet (CAT5 UTP) Cable ¾ This User Guide ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Chapter 1. Introduction 1.1 Overview of the production Thank you for choosing the TL-POE150S PoE Supplier Adapter.
technology for it will ensure the normal working status of your network while keep the existing Ethernet infrastructure secure. *PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. *PD: a device powered by a PSE and thus consumes energy. Examples include powering IP telephones, wireless LAN access points, network cameras, network hubs, embedded computers etc.
DC 48V: Connect to the provided power adapter which can supply steady power of 48V DC. LAN IN: Connect to a network device (such as a Switch or Router ) with CAT5 UTP cable. PWR: Power LED, a steady green light indicates that the PoE system has detected the PD or PoE Receiver Adapter and the power adapter is working properly. Chapter 3.
3. Connect the POWER+DATA OUT port of the TL-POE150S to a PD or a PoE Receiver Adapter with CAT 5 UTP cable. Now, the device can work normally with data and power. There are two schemes to realize the PoE. 1. If the device supports PoE (take an IP camera with PoE for example), following topology will work: CAT5 UTP Cable (Data) Switch TL-SF1008D Power Adapter Power Cable (Power) TL-POE150S IP camera with PoE CAT5 UTP Cable (Power & Data) ` 2.
Power Adapter Notebook With Wireless Adapter Power Cable (Power) CAT5 UTP Cable (Data) TL-POE150S CAT5 UTP Cable TL-POE10R (Power & Data) Power Cable CAT5 UTP Cable Switch TL-SF1008D (Data) Wireless AP TL-WA601G ) Note: ¾ Do not mistake the power port of the TL-POE150S and TL-POE10R when choosing the scheme 2, or else it will cause serious damage to your network device.
Appendix A: Specification Normal Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3af Power Output 15.4W (48V DC) Ports PoE Port 100BASE-TX / 10BASE-T dual purpose LAN Port port Cabling Type RJ45 CAT 5 UTP cable LED PWR Safety & Emissions FCC, CE Environmental and Physical Operating Temp. 0℃~40℃ (32℉~104℉) Storage Temp.
