User Guide TL-POE150S PoE Injector Rev:2.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2009 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENTS Package Contents.................................................................... 1 Chapter 1 Introduction .......................................................... 1 1.1 1.2 Overview of the Production ......................................... 1 Features ...................................................................... 2 Chapter 2 Identifying External Components....................... 2 Chapter 3 Connecting the PoE Injector............................... 3 Appendix: Specifications.......
Package Contents The following items should be found in your package. ¾ ¾ ¾ ¾ TL-POE150S PoE Injector One Power Adapter One Ethernet (CAT5 UTP) Cable This User Guide ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact with your distributor. Chapter 1 Introduction 1.1 Overview of the Production Thank you for choosing the TL-POE150S PoE Injector.
*PoE: This technology describes a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. *PD: A device powered by a PSE and thus consumes energy. Examples include powering IP telephones, wireless LAN access points, network cameras, network hubs, embedded computers etc. *PSE: A device (switch or hub for instance) that will provide power in a PoE setup. 1.2 Features ¾ Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.
DC 48V: Connect to the provided power adapter which can supply steady power of 48V DC. LAN IN: Connect to a network device (such as a Switch or Router ) with CAT5 UTP cable. PWR: Power LED, a steady green light indicates that the PoE system has detected the PD or PoE Splitter and the power adapter is working properly.
Scheme 1 2. If the device does not support PoE, it is necessary to have a PoE Splitter to separate the power and data, transmitting them detached in one UTP cable and one power cable. Here we take TP-LINK TL-POE10R Splitter for example. You can use following topology.
) Note: ¾ Do not mistake the power port of the TL-POE150S and TL-POE10R when choosing the Scheme 2, or else it will cause serious damage to your network device. ¾ If you want to know more details about TL-POE10R Splitter, please refer to “TL-POE10R User Guide” on our website http://www.tp-link.com. Appendix: Specifications Normal Standards Ports PoE Port LAN Port IEEE 802.3, 802.3af IEEE 802.
