User Guide TL-POE200 Power over Ethernet Adapter Kit Rev:2.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України.
CONTENTS Package Contents ..........................................................................1 Chapter 1 Introduction .................................................................1 1.1 1.2 Overview of the Product....................................................1 Features............................................................................2 Chapter 2 Identifying External Components .............................. 2 2.1 2.2 PoE Injector ..................................................
Package Contents The following items should be found in your package. ¾ TL-POE200 Power over Ethernet Adapter Kit ¾ Ethernet (CAT5 UTP) Cable ¾ Female-to-Female Power Connector ¾ 48V DC Power Adapter ¾ This User Guide ) Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor. Chapter 1 Introduction 1.
1.2 Features ¾ Complies with IEEE 802.3, IEEE 802.3u standards ¾ Transmits electrical power along with data in one single cable ¾ Supports optional 5V DC , 9V DC or 12V DC power supply ¾ Supports Plug-and-Play for the devices, without any configuration ¾ Elegant appearance with space-saving miniature size Chapter 2 Identifying External Components 2.1 PoE Injector POWER+DATA OUT: Connect to the PD or PoE Receiver Adapter with a CAT5 UTP cable.
LAN IN: Connect to a network device (such as a Switch or Router) with CAT5 UTP cable. DC 48V: Connect to the provided power adapter which can supply steady power of 48V DC. PWR: Power LED, a steady green light indicates that the power adapter is working properly. 2.2 PoE Splitter POWER+DATA IN: Connect to the PSE or PoE Injector with a CAT5 UTP cable. Power-mode switch: You can choose the DC output of 12V, 9V or 5V by turning the switch to the left or right.
LAN OUT: Connect to the Ethernet device with CAT5 UTP cable to transmit data. DC OUT: Connect to the power port of the Ethernet device with the provided power cable to supply the power of 5V, 9V or 12V DC. PWR: Power LED, a steady green light indicates that the PoE Injector can supply power. ) Note: TL-POE200 Power over Ethernet Kit is not compliant with IEEE 802.3af standard. The TL-POE200A (PoE Injector) and TL-POE200B (PoE Splitter) can only be operated together.
Step 1: Insert one end of a Cat 5 Ethernet RJ45 Cable into the LAN IN port of the PoE Injector, and connect the other end of the cable to your network Switch or PC. ) Note: Do not mistake the LAN IN port with the POWER+DATA OUT port. Plugging the Ethernet cable into the wrong Ethernet port may cause serious damage to your network devices. Step 2: Plug one end of the Power Adapter into the DC 48V port of the PoE Injector and the other end into your electrical outlet.
6
Appendix: Specifications Normal Standards Voltage Output Output Power TL-POE200A Ports IEEE 802.3, IEEE 802.
