User manual

ManualsBrandsTP-LINK ManualsNetwork ComponentsNetwork print server LAN (10/100 Mbps), Parallel (IEEE 1284)

The product model shown in this QIG is TL-PS110U, as an example.

Before you start, you should prepare the following items

¾ Windows 2000/XP/2003/Vista/7 computer with print server setup CD

¾ One Printer

¾ One Printer cable

¾ One Router

Hardware Installation

1. Turn off the printer’s power.

2. Connect the print server to

your printer with the supplied

printer cable. Connect the

print server to your Router

with the RJ45 cable. The

image beside is the classic

infrastructure topology for

reference:

3. Turn the printer’s power on.

4. Plug the AC power adapter into the power connector on the print server.

5. Wait 40 seconds as part of the print server’s Power On Self Test (POST).

Factory Default Settings

¾ Username: admin

¾ IP Address: 192.168.0.10

¾ Subnet Mask: 255.255.255.0

The TL-PS110U is produced without password by default.

Note

Summary of content (10 pages)

PAGE 1
Note The product model shown in this QIG is TL-PS110U, as an example. Before you start, you should prepare the following items ¾ Windows 2000/XP/2003/Vista/7 computer with print server setup CD ¾ One Printer ¾ One Printer cable ¾ One Router Hardware Installation 1. Turn off the printer’s power. 2. Connect the print server to your printer with the supplied printer cable. Connect the print server to your Router with the RJ45 cable.
PAGE 2
1 Configuring the Printer Server Select the Print Server Insert the provided CD into your computer’s CD dirve, the Setup Wizard will automatically pop up on your computer’s screen. Select TL-PS110U Note If you don’t have a CD-ROM, you can click to our web site (http://www.tplink.com/support/download.asp) and download the PrintServer_Setup_Wizard.
PAGE 3
Click Next On the Select A Print Server screen, TL-PS110U will be detected as “1P_PrintServXXX”. Select the print server Click Next Configure the Print Server Please select Yes.
PAGE 4
Assign a static IP to your Print Server. The IP should be within the same subnet of your Router Click Next Note The IP address of the print server must be within the same subnet with your Router, for example: Network device Note IP address Router/Gateway 192.168.1.1 Print server 192.168.1.10 Remember the IP address of the Print Server, because you may log into the Print Server by this IP next time.
PAGE 5
PSWizard is saving the configurations to the print server Click Next 5
PAGE 6
2 Configuring the Printer This page will then display. If your printer has already appeared in the Printer Name list, please follow the instruction . Otherwise please follow the instruction Select an existing printer by the printer name Click Next, and then follow the step by step instructions to complete the installation You have now installed the print server and the printer successfully. You can print through the network.
PAGE 7
Click Add New Printer Click Next Select Local printer attached to this computer Click Next 7
PAGE 8
Tick Use the following port and select LPT1: (Recommended Printer Port) from the pull-down list Click Next Select the manufacturer and model of your printer Click Next Note If you already have the printer’s driver installed, you will be asked whether to keep or replace it. Please select replace it.
PAGE 9
Select No Click Next Click Next, and then follow the step by step instructions to complete the installation You have now installed the print server and the printer successfully. You can print through the network. Note The print server needs to be configured only once, other users who want to share the printer only need to install the driver of the printer and configure the TCP/IP port on their computers. Please refer to the User Guide on the resource CD.
PAGE 10
Technical Support For more troubleshooting help, go to: www.tp-link.com/support/faq.asp To download the latest Firmware, Driver, Utility and User Guide, go to: www.tp-link.com/support/download.asp For all other technical support, please contact us by using the following details: Global Tel: +86 755 26504400 E-mail: support@tp-link.com Service time: 24hrs, 7days a week Singapore Tel: +65 62840493 E-mail: support.sg@tp-link.