Operation Manual

TL-R4199G SMB Broadband Router User Guide

Figure 4-49

¾ MAC Address - This field displays the MAC address of the controlled computer in the LAN.

¾ IP Address - This field displays the assigned IP address of the controlled computer in the

LAN.

¾ Bind - Select Whether enable the arp binding or not. Only bind the MAC address and IP

address can the function take effect.

To add/modify an IP & MAC binding entry:

Step 1: Click Add New…/Modify shown in Figure 4-49, you will see a new screen shown in

Figure 4-50.

Step 2: Enter the MAC Address and IP Address in the

corresponding field.

Figure 4-50

Step 3: Select Bind the MAC and IP address, then click Save button to save the configuration.

To find a specific IP & MAC binding entry:

Step 1: Click Find shown in Figure 4-49, you will see a new screen shown in Figure 4-51.

Step 2: Enter the specific MAC Address or IP

Address in the corresponding field.