TL-R4299G Dual-WAN SMB Broadband Router Rev:1.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2007 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Package contents The following contents should be found in your box: ¾ ¾ ¾ ¾ One TL-R4299G Dual-WAN SMB Broadband Router One power cord for TL-R4299G Dual-WAN SMB Broadband Router One Resource CD for TL-R4299G Dual-WAN SMB Broadband Router, including: • This Guide • Other Helpful Information Mounting kits for installing in a standard 19-inch rack ) Note: If any of the listed contents are damaged or missing, please contact the retailer from whom you purchased the product for assistance.
CONTENTS Chapter 1. Introduction ........................................................................................ 1 1.1 Overview of the Router .................................................................................................. 1 1.2 Features......................................................................................................................... 1 1.3 Conventions......................................................................................................
4.6.5 Screen ............................................................................................................................47 4.7 Static Routing .............................................................................................................. 50 4.8 Session Limit ............................................................................................................... 52 4.9 4.8.1 Session Limit ..........................................................................
TL-R4299G Dual-WAN SMB Broadband Router User Guide Chapter 1. Introduction 1.1 Overview of the Router The TL-R4299G Dual-WAN SMB Broadband Router possesses excellent throughput and driving load capability, which consumedly meets the requirements from Internet cafe and small /medium/sizable enterprise with volumes of users, making a more expedite communication. The superior performance will bring you full-new experience of a non-bottle-neck network.
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter ¾ Ignores Ping packets from WAN or LAN ports ¾ Supports firmware upgrade ¾ Supports Remote and Web management 1.3 Conventions Parameters provided in the pictures are just references for setting up the product, which may differ from the actual situation. You can set the parameters according to your demand. Chapter 2. Hardware installation 2.1 Panel Layout 2.1.
TL-R4299G Dual-WAN SMB Broadband Router User Guide The front panel contains the following features. (Viewed from left to right) ¾ Reset: Use the button to restore the router to the factory defaults. There are two ways to reset the router: Method one: Use the Factory Defaults function on System Tools -> Factory Defaults page in the router's Web-based Utility. Method two: Use the Factory Default Reset button. First, turn off the router's power.
TL-R4299G ¾ Dual-WAN SMB Broadband Router User Guide Operating Humidity: 10%~90%RH, Non-condensing ) Note: Do not use this product near water, for example, in a wet basement or near a swimming pool. Avoid using this product during an electrical storm. There may be a remote risk of electric shock from lightning. 2.4 Connecting the Router Before you install the router, you should connect your PC to the Internet through your broadband service successfully.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Chapter 3. Quick Installation Guide After connecting the TL-R4299G router into your network, you should configure it. This chapter describes how to configure the basic functions of your TL-R4299G Dual-WAN SMB Broadband Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after it has been successfully configured. 3.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 3-2 Step 3: In the next screen, select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK. Figure 3-4 ) Note: You can configure the PC to get an IP address manually, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above. Now, you can run the Ping command in the command prompt to verify the network connection.
TL-R4299G Dual-WAN SMB Broadband Router User Guide If the result displayed is similar to the screen shown below, it means that your PC has not connected to the Router. Figure 3-6 You can check it follow the steps below: ) Note: Is the connection between your PC and the Router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. Is the TCP/IP configuration for your PC correct? If the Router's IP address is 192.168.1.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 3-7 ) Note: If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a proxy. Choose Tools menu→Internet Options→Connections→LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. Step 1: Select the Quick Setup tab on the left of the main menu and the “Quick Setup” screen will appear. Click the Next button.
TL-R4299G Dual-WAN SMB Broadband Router User Guide ) Note: The router supports three popular ways to connect to Internet. Please select one compatible with your ISP, if you are given another way not listed here, refer to Network→ WAN for detailed list. Step 3: If you choose PPPoE, you will see the screen as shown in Figure 3-10, enter the Username and Password provided by your ISP. These fields are case sensitive. If you have difficulty with this process, please contact your ISP.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Chapter 4. Configuring the Router This User Guide recommends using the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read this chapter and configure advanced settings though the Web-based Utility. After your successful login, you can configure and manage the router. There are main menus on the left of the Web-based Utility.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-1 ¾ LAN - This field displays the current information for the LAN, including the “MAC address”, “IP address” and “Subnet Mask”. ¾ WAN 1~2 - This field displays the parameters applied to the WAN ports of the router, including “MAC address”, “IP address”, “Subnet Mask”, “Default Gateway” and so on. ) Note: If PPPoE/L2TP/PPTP is chosen as the WAN connection type, the Disconnect button will be shown here while you are accessing the Internet.
TL-R4299G 4.2 Dual-WAN SMB Broadband Router User Guide Quick Setup Please refer to chapter 3"Quick Installation Guide". 4.3 Network Choose menu “Network”, the next submenus are shown below: Figure 4-2 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.3.1 LAN Choose menu “Network→LAN”, you can configure the IP parameters of the LAN on the screen below.
TL-R4299G Dual-WAN SMB Broadband Router User Guide DHCP sever will not take effect, until they are re-configured. Besides this, the Virtual Server and DMZ Host may change accordingly at the same time, you’d better re-configure it as well. 4.3.2 WAN Choose menu “Network→WAN”, you can configure the IP parameters of the WAN on the screen below.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-4 ¾ interior network: When the WAN is connecting with a LAN, you can select the option, and enter the LAN IP addresses in the field, then the WAN port will only transmit the traffic whose destination IP address are contained in the field. ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you need to reduce the MTU.
TL-R4299G Dual-WAN SMB Broadband Router User Guide applications. If you can not get the IP address normally, you can choose this option. (You don’t need select this option generally). ¾ Ingress Bandwidth: Enter the bandwidth for ingress traffic. ¾ Egress Bandwidth: Enter the bandwidth for egress traffic. 2. Static IP If you are given a fixed IP (static IP), please select Static IP (shown in Figure 4-5), and then fixed IP parameters specified by your ISP.
TL-R4299G Dual-WAN SMB Broadband Router User Guide (Optional). ¾ Secondary DNS - Type another DNS address in dotted-decimal notation provided by your ISP if provided (Optional). ¾ Ingress Bandwidth: Enter the bandwidth for ingress traffic. ¾ Egress Bandwidth: Enter the bandwidth for egress traffic. 3. PPPoE If you are given a user name and a password, please select PPPoE (shown in Figure 4-6).
TL-R4299G Dual-WAN SMB Broadband Router User Guide ) Note: 1) If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field. Otherwise, enter the number of minutes you want to have elapsed before your Internet connection terminates. 2) Sometimes the connection can not be disconnected although you specify a time to Max Idle Time. This is because there may still be active applications in the background, which may cause fee accounted by your ISP.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-7 ¾ MTU Size- The default MTU size is 1492 bytes, which is usually fine. For some ISPs, you need modify the MTU. This should not be done unless you are sure it is necessary for your ISP. ¾ Service Name/AC Name - The service name and AC (Access Concentrator) name should not be configured unless you are sure it is necessary for your ISP.
TL-R4299G 4. Dual-WAN SMB Broadband Router User Guide BigPondCable If your ISP provides BigPond Cable (or Heart Beat Signal) connection, please select BigPond Cable option. Figure 4-8 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Auth Server - Enter the authenticating server IP address or host name. ¾ Auth Domain - Type in the domain suffix server name based on your location.
TL-R4299G Dual-WAN SMB Broadband Router User Guide after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain active at all times, enter 0 in the Max Idle Time field.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-9 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time).
TL-R4299G Dual-WAN SMB Broadband Router User Guide enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-10 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time).
TL-R4299G Dual-WAN SMB Broadband Router User Guide enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually.
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Destination IP Address for Ping - Enter the correct IP address that really existed on the WAN network. For example: 202.96.134.188. ¾ By DNS Query - Detect whether Internet connection is online or not by sending query packet to DNS Server. ¾ DNS Server IP Address - Enter the correct DNS IP address that really existed on the WAN network. For example: 202.96.134.133. 4.3.
TL-R4299G Dual-WAN SMB Broadband Router User Guide ISPs. For example, you can specify some packets prior forwarding from WAN port 1, which depend on specified source or destination IP addresses. Figure 4-13 ¾ Enable/Disable WAN - Enable the WAN port you want to use, then click Save to make it effective. ¾ Additional IP Address dispatch rules - Enable the function and then make the dispatch rules. ¾ ¾ Backup - Click the button to backup the list files.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-14 Click Save. To add additional rules, repeat steps 1-3. Other configurations for the entries as shown in Figure 4-20: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-15 ¾ On Fastest-Session - If you select the option, the data will be transmited through one of the WAN ports which connect the WAN much quicker than the other. • Faster age for Speed-Detect-Table - Faster timeouts for the entries in Speed-Detect-Table. • Age for Speed-Detect-Table - Normal timeouts for the entries in speed-Detect-Table. During the time, if an entry has never been used, the entry will be deleted from the table.
TL-R4299G Dual-WAN SMB Broadband Router User Guide • Age for IP-Pairs-Table - Normal timeouts for the entries in Paired-IP-first Table. During the time, if an entry has never been used, the entry will be deleted from the Paired IP Table. • Obliged age for IP-Pairs-Table - The maximal timeouts for the entries in IP-Pairs-Table. During the time, the entry will be deleted from the Paired IP Table no matter whether the entry has been used.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Enabled. ¾ Flow Control - This displays whether the Flow Control is Enabled, "Enabled" means the function is enabled, "Disabled" means the function is't enabled. ¾ Negotiation Mode - The options are: Auto Negotiation, 10M Half Duplex, 10M Full Duplex,100M Half Duplex,100M Full Duplex. ¾ Ingress Limit Mode & Ingress Limit Speed - Select the limit mode and limit speed for the WAN ports.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-18 ¾ DHCP Server - Enable or disable the DHCP server. If you disable the Server, you must have another DHCP server within your network or else you must manually configure the computer. ¾ Start IP Address - This field specifies the first address in the IP address pool. The default address is 192.168.1.100. ¾ End IP Address - This field specifies the end address in the IP address pool. The default address is 192.168.1.199.
TL-R4299G Dual-WAN SMB Broadband Router User Guide update the information. Figure 4-19 ¾ Client Name - This field displays the name of the DHCP client ¾ MAC Address - This field displays the MAC address of the DHCP client ¾ Assigned IP - This field displays the IP address that the router has allocated to the DHCP client. ¾ Lease Time - This field displays the time of the DHCP client leased. Before the time is up, DHCP client will request to renew the lease automatically. 4.4.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-21. Step 2: Enter the MAC address, IP address and select Status as shown in the screen below. Figure 4-21 Step 3: Click the Save button when finished. ) Note: 4) If you want to add more than one reserved IP, please go to step 1 to continue. 5) The function won't take effect until the router reboots. Other configurations for the entries as shown in Figure 4-20: Click the Delete button to delete the entry.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Virtual servers can be used for setting up public services on your LAN, such as DNS, Email and FTP. A virtual server is defined as a service port, and all requests from Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was configured as a virtual server must have a static or a reserved IP address because its IP address may change when using the DHCP function.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-24 Step 3: After that, select Enable to make the entry take effect. Step 4: Click Save button to save the configuration. ) Note: 6) If you want to add more than one reserved IP, please go to step 1 to continue. 7) It is possible that you configure more than one type of available service on a computer or server, it means the IP addresses for the virtual servers are same.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-25 ¾ Trigger Port - This displays the port for outgoing traffic. An outgoing connection using this port will "Trigger" this rule. ¾ Trigger Protocol - This displays the protocol used for Trigger Ports, either TCP,UDP, or All (all protocols supported by the router). ¾ Incoming Ports - This displays the port or port range used by the remote system, they are used for responding to the outgoing request.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-26 Step 3: After that, select Enabled to make the entry take effect. Step 4: Click Save button to save the configuration. ) Note: 1) If you want to add more than one reserved IP, please go to step 1 to continue. 2) When the trigger connection is released, the according opening ports will be closed. 3) Each rule allowed to be used only by one host on LAN synchronously. The trigger connection of other hosts on LAN will be refused.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-27 To assign a computer or server to be a DMZ server: Step 1: Click the Enable radio button Step 2: Enter the local host IP address in the DMZ Host IP Address field Step 3: Click the Save button. ) Note: After you set the DMZ host, the firewall related to the host will not take effect. 4.5.4 UPnP Choose menu “Forwarding→UPnP”, you can view the information about UPnP in the screen (shown in Figure 4-28).
TL-R4299G Dual-WAN SMB Broadband Router User Guide ¾ Protocol - This displays the protocol for the application. ¾ Internal Port - This displays the Internal port, which the router opened for local host. ¾ IP Address - The UPnP device that is currently accessing the router. ¾ Status - This displays the status. Enabled means that the port is still active, Disabled means that the port is inactive. 4.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-30 ¾ Enable Firewall - Enable the general firewall switch or not. ¾ Enable IP Address Filtering - Enable the IP Address Filtering or not. There are two default filtering rules, please select the rule for your need. ¾ Enable Domain Filtering - Enable the Domain Filtering or not. ¾ Enable MAC Address Filtering - Enable MAC Address Filtering or not. There are two default filtering rules, please select the rule for your need.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-31 ¾ Effective Time - This is the time or the range of time for the entry to take effect. For example, 1800 - 2200, it means that the entry will take effect from 18:00 to 22:00. ¾ LAN IP - This is the LAN IP address or the range of LAN IP addresses in dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field blank, which means all LAN IP addresses are controlled by the rule.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 2: Click Add New…/Modify shown in Figure 4-31, you will see a new screen shown in Figure 4-32. Step 3: Enter the “Effective time” that the rule will take effect as shown in Figure 4-32. Step 4: Enter the “LAN IP Address”, “LAN Port”, “WAN IP Address” and “WAN Port” in the corresponding field as shown in Figure 4-32. Step 5: Select the “Protocol”, “Action” and “Status” for the rule as shown in the next screen.
TL-R4299G 4.6.3 Dual-WAN SMB Broadband Router User Guide Domain Filtering Choose menu “Security→Domain Filtering”, you can configure the Domain filtering rule in the next screen (shown in Figure 4-34). The Domain Filtering feature allows you to control access to certain websites on the Internet by specifying their domains or key words. Figure 4-34 ¾ Effective Time - This is the time or the range of time for the entry to take effect.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-35 Step 5: Finally, click Save to make the rule take effect. Step 6: Go to Step 2 to complete the other rules continually. After you finish the configurations, you will see the rules in the table below: Figure 4-36 ) Note: Before adding an IP Address Filtering entry, you should enable the Firewall and the IP Address Filtering function first (shown in Figure 4-30).
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-37 ¾ MAC Address - .This is the PC’S MAC address which is controlled by the rule, its format of is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0E-AE-B0-00-0B. ¾ Description - This is the description about the PC, Fox example: John’s PC. ¾ Status - This field displays the status, Enabled means the rule is effective, Disabled means the rule is ineffective.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-38 Step 4: Finally, click Save to make the rule take effect. Step 5: Go to Step 2 to complete the other rules continually. After you finish the configurations, you will see the rules in the table below: Figure 4-39 ) Note: Before adding a MAC Address Filtering entry, you should enable the Firewall and the MAC Address Filtering function first (shown in Figure 4-30).
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-40 ¾ Region - This option used to select the specifically area from which the packets will be monitored by the next settings. ¾ Scan Attack Defence • IP Scan: During the specific time, if a computer (identified by a particular source IP address) transmits packets to at least ten different computers (identified by different destination IP addresses), then the source IP address will be deemed to make IP Attacks.
TL-R4299G • Dual-WAN SMB Broadband Router User Guide Port Scan - During the specific time, if a computer (identified by a particular source IP address) transmits TCP SYN packets to another computer's (identified by a destination IP address) ten different ports, then the source IP address will be deemed to make Port Attacks. And the Router will start up the blocking function immediately.
TL-R4299G Dual-WAN SMB Broadband Router User Guide ACK is considered as abnormal. And the Router will start up the blocking function immediately. • Unknow Protocol - In IP head the protocol type field, 135 and the value bigger than 135 is reserved and undefined. Because the protocols are undefined, we can not predict a specifically unknow protocol is well-meaning or baleful. To these nonstandard protocols, the carefully attitude is the best way to prevent them interning into the protected network.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-41 ¾ Destination IP Address - The “Destination IP Address” is the address of the network or host that you want to assign to a static route. ¾ Subnet Mask - The “Subnet Mask” determines which portion of an IP address is the network portion, and which portion is the host portion. ¾ Default Gateway - This is the IP address of the gateway device that allows for contact between the router and the network or host.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-45. Step 2: Enter the appropriate LAN IP Address, Max Session and then select the status. Figure 4-45 Step 3: Click the Save button. 4.8.2 Session List Choose menu “Session Limit→Session List”, you can view the the information about the number of connection. Figure 4-46 ) Note: You can click the Refresh to update the information. 4.
TL-R4299G 4.9.1 Dual-WAN SMB Broadband Router User Guide QoS Settings Choose menu “QoS→QoS Settings”, you can configure the Upload Bandwidth and Download Bandwidth in the next screen, their value you configure should be less than 1000000Kbps. Figure 4-48 4.9.2 QoS Rules List Choose menu “QoS→QoS Rules List”, you can view and configure the QoS rules in the screen below. Figure 4-49 ¾ Description - This is the information about the rules such as address range.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-50 Step 3: Click the Save button. 4.10 IP & MAC Binding Choose menu “IP & MAC Binding”, you can see the submenus under the main menu: Binding Setting, ARP List. Figure 4-51 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.10.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-52 ¾ MAC Address - This field displays the MAC address of the controlled computer in the LAN. ¾ IP Address - This field displays the assigned IP address of the controlled computer in the LAN. ¾ Bind - Select Whether enable the arp binding or not. Only bind the MAC address and IP address can the function take effect.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-54 Step 3: Click Find button, then you will see the entry with the specific MAC address or IP address. Step 4: Click Back to return the previous screen. ) Note: You can click “to page” to edit the entry in the corresponding screen. Other configurations for the entries as shown in Figure 4-52: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Delete All button to delete all the entries.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Click Load to load the specific item to the IP & MAC Binding list (shown in Figure 4-52). Click Delete to load the specific item to the IP & MAC Binding list. Click the Bind All button to bind all the current items, available after enable. Click the Load All button to load all items to the IP & MAC Binding list (shown in Figure 4-52). Click the Refresh button to refresh all items.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Step 1: Select the WAN port to configure. Step 2: Type the “User Name” and “Password” for your DDNS account. Step 3: Enter the domain name that your dynamic DNS service provider offers. Step 4: Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service. 4.11.2 PeanutHull DDNS If your dynamic DNS Service Provider is www.oray.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-58 To set up for Comexe DDNS, follow these instructions: Step 1: Select the WAN port to configure. Step 2: Enter the domain name your dynamic DNS service provider offer. Step 3: Type the “User Name” and “Password” for your DDNS account. Step 4: Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service. 4.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-59 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.12.1 Port Statistics Choose menu “Switch Setting→Port statistics”, you can view the statistics information about the LAN port in the next screen (shown in Figure 4-60). Figure 4-60 ) Note: Before you view the information, please click the Refresh button to update it. 4.12.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-61 ¾ Mirror Config - There are three Mirror modes: Disable, Output mirror, Input mirror. The Output/Input mirror is related to the Router. ¾ Port Mirror - This is the port linked to the mirror computer. ¾ Mirrored Ports List - The option used to select ports to be mirrored. ) Note: You should make sure that the Mirror Port and the Mirrored Ports are in the same VLAN. 4.12.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-62 4.12.4 Port Parameter Choose menu “Switch Setting→Port Parameter”, you can configure the parameters for the LAN port in the next screen (shown in Figure 4-63).
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-63 4.12.5 Port Status Choose menu “Switch Setting→Port Status”, you can view the status of the LAN port in the next screen (shown in Figure 4-64).
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.12.6 Port VLAN Choose menu “Switch Setting→Port VLAN”, you can view and configure the VLAN table. Figure 4-65 ¾ Port - You can select them as the members of VLAN. ¾ Enable - This used to enable the corresponding VLAN configuration. ¾ Clean - Click this button, you can make all the entries Disabled. ¾ Save - Click this button, the Router will make a new VLAN table according to the current configuration, and the enabled VLAN will take effect. 4.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.13.1 Time Settings Choose menu “System Tools→Time Settings”, you can configure the time on the screen (shown in Figure 4-67). Figure 4-67 ¾ Time zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/DD/YY into the right blanks.
TL-R4299G Dual-WAN SMB Broadband Router User Guide 4.13.2 Firmware Choose menu “System Tools→Firmware”, you can update the latest version of firmware for the Router on the screen (shown in Figure 4-68). Figure 4-68 ¾ Firmware Version - This displays the current firmware version. ¾ Hardware Version - This displays the current hardware version. The hardware version of the upgrade file must accord with the Router’s current hardware version.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-69 Click the Restore button to reset all configuration settings to their default values. ) Note: 1) The default User Name is admin. 2) The default Password is admin. 3) The default IP Address is 192.168.1.1. 4) The default Subnet Mask is 255.255.255.0. All settings you have saved will be lost when the default settings are restored. 4.13.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-71 Step 2: Save the file as the appointed file (shown in Figure 4-72). Figure 4-72 To restore the Router’s settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact path to the Setting file in the text box. Step 2: Click the Restore button to complete. 4.13.
TL-R4299G Dual-WAN SMB Broadband Router User Guide screen. Figure 4-73 ) Note: Some settings of the router will take effect only after rebooting, which include: 1) Change LAN IP Address. (System will reboot automatically) 2) MAC Clone (system will reboot automatically) 3) DHCP service function. 4) Static address assignment of DHCP server. 5) Web Service Port of the router. 6) Upgrade the firmware of the router (system will reboot automatically).
TL-R4299G 2) Dual-WAN SMB Broadband Router User Guide The new user name and password must not exceed 14 characters in length and must not include any spaces. Enter the new Password twice to confirm it. 3) You can click the Clean All button to clean all the configurations. 4.13.7 System Log Choose menu “System Tools→System Log”, you can view the logs of the Router. Figure 4-75 The router can keep logs of all traffic. You can query the logs to find what happened to the router.
TL-R4299G Dual-WAN SMB Broadband Router User Guide entering that number in the box provided. Choose a number between 1024 and 65534, but do not use the number of any common service port. ¾ Remote Management IP Address - This is the current address you will use when accessing your router from the Internet. The default IP address is 0.0.0.0. It means this function is disabled. To enable this function, change the default IP address to another IP address as desired.
TL-R4299G ¾ Dual-WAN SMB Broadband Router User Guide Statistics Table - This table displays the statistics information about the traffic.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure 4-78 ¾ Destination IP - the IP address which datagrams are sent to, such as- 202.96.134.188. ¾ ID - The number of ICMP datagrames to be sent. ¾ Source Port - The port where datagrams are sent to, such as- 5000 ¾ Destination Port - The datagrams' distination port, such as-6000. ¾ UDP Data - The data carried when sent UDP detect datagram, take care if in the UDP data exist character ".", for example, 123.456, www.sohu.
TL-R4299G Dual-WAN SMB Broadband Router User Guide UDP datagram. ¾ Detect Result - The interval between sending datagram and recving datagram, uint is ms. 4.13.11 IP NAT Table Choose menu “System Tools→IP NAT Table”, you will see the IP NAT in the table below: Figure 4-79 ¾ Out Link - The WAN port which links the router. ¾ Protocol Type - The protocol which is used in the link. ¾ IP address - The local or remote IP address to be examined.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Appendix A: Specifications General Standards and Protocols IEEE 802.3, 802.3u , 802.3x, 802.1x TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP,HTTP,DNS Safety & Emission FCC、CE Ports Two 10/100M Auto-Negotiation WAN RJ45 port.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Appendix B: FAQ 1. How do I configure the router to access Internet by ADSL users? Step 1: First, configure the ADSL modem in RFC1483 bridge model. Step 2: Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL modem. Step 3: Login to the router, click the menu Network→WAN on the left of your browser. On the WAN screen, select “PPPoE” for the type of WAN connection.
TL-R4299G 2. Dual-WAN SMB Broadband Router User Guide How do I configure the router to access Internet by Ethernet users? Step 1: Login to the router, click the menu Network→WAN on the left of your browser, On the WAN screen, select “Dynamic IP” for "WAN Connection Type", and finish it by clicking Save. Step 2: Some ISPs require that you register the MAC address of your adapter, which is connected to your cable or DSL modem during installation.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure B-4 ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. Method two: Use DMZ Host Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select “Enable”, and enter your IP address into the “DMZ Host IP Address” field (using 192.168.1.102 as an example), then to click the Save button. Figure B-5 7.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Figure B-6 ) Note: If the above configuration takes effect, you should login the Router by entrying http://192.168.1.1:88 (the router’s LAN IP address: Web Management Port) in the address field of the web browser.
TL-R4299G Dual-WAN SMB Broadband Router User Guide Appendix C: Glossary ¾ DDNS (Dynamic Domain Name System) - The capability of assigning a fixed host and domain name to a dynamic Internet IP address. ¾ DHCP (Dynamic Host Configuration Protocol) - A protocol that automatically configure the TCP/IP parameters for the all the PCs that are connected to a DHCP server.