User Guide

-67-
Figure 4-36 Static Route
The following items are displayed on this screen:
 Static Route
Destination:
Enter the destination host the route leads to.
Subnet Mask:
Enter the Subnet Mask of the destination network.
Next Hop:
Enter the gateway IP address to which the packet should be sent next.
Interface:
Select the physical network interface, through which this route is
accessible.
Metric:
Defines the priority of the route. The smaller the value is, the higher the
priority is. The default value is 0. Keep the default value if unnecessary.
Description:
Give a description for the entry.
Status:
Activate or inactivate the entry.
 List of Rules
You can view the information of the entries and edit them by the Action buttons.