Application Guide

Step 9:

Click on Add and then click on Save.

Note:

1) If the IP addresses in the IP Address Pool is not in the same subnet with the VPN router’s

LAN port, the IP address Pool here should choose PPTP2_Dialup_User.

2) In the latest firmware of TP-LINK router, the Enable VPN-to-Internet button is removed

and the VPN feature is enabled by default.

3) DNS setting is not necessary and it can be kept as default. The default IP is “0.0.0.0”,

which means the LAN IP of the router is used as the DNS server address. Or you can enter

the well-known DNS server.

C. Configuring PPTP client on remote PC (Windows 7)

NOTE: For remote PC to connect to PPTP server, it can use Windows built-in PPTP software

or Third-party PPTP software.

Step 1:

Click on Start->Control Panel->Network and Internet->Network and Sharing Center.

Step 2:

Click on Set up a new connection or network.