Application Guide

55
Only in this way, the remote VPN clients can access the Internet via the VPN router in the
headquarters. The following contents will respectively introduce the two situations.
 In the Same Subnet
1) Configure the IP Address Pool of access router A as step 2.
2) Keep using the default gateway on remote network on clients, as the steps in the
following picture.
 In the Different Subnet
1) Configure the IP Address Pool of access router A as step 1.
2) Choose the menu Advanced→NAT→Multi-Nets NAT to enter the Subnet/Mask and
select the Status Activate.
Enter pool name
Click
on
Add