Application Guide

6
Step 3 : Click on IKE Policy, enter Policy Name whatever you like, select Exchange Mode, in
this example we use Main, select IP Address as ID Type.
Step 4 : Under IKE Proposal 1, we use test1 in this example. Enter Pre-shared Key and SA
Lifetime you want, DPD is disabled.
Step 5 : Click on Add.
Step 6 : Click on IPsec on the left menu, then IPsec Proposal. Select Security Protocol, ESP
Authentication and ESP Encryption you want to enable on VPN tunnel. Here we
use ESP, MD5 and 3DES for example.