User Guide
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware installation
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: Specifications
- Appendix B: Preventing Lightning
- Appendix C: FAQ
- Appendix D: Glossary
SafeStream
TM
Gigabit Broadband VPN Router User GuideTL-R600VPN
11
)
Note:
Four ways to connect to Internet are provided in Quick Setup. Please select one compatible with
your ISP. If you are given another way not listed here, refer to Network→ WAN for detailed list.
Step 3: If Auto-Detect is chosen, the router will detect the Internet connection type provided by
your ISP automatically.
Figure 3-10
Step 4: If you choose PPPoE, you will see the screen as shown in Figure 3-11. Enter the
Username and Password provided by your ISP. These fields are case sensitive. If you
have difficulty with this process, please contact your ISP.
Figure 3-11
Step 5: If you choose Dynamic IP in Figure 3-9, the router will automatically receive the IP
parameters from your ISP without needing to enter any parameters.
Step 6: If you Choose Static IP, you should enter the detailed IP information in Figure 3-12.
Click the Next button
Figure 3-12