User Guide
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware installation
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: Specifications
- Appendix B: Preventing Lightning
- Appendix C: FAQ
- Appendix D: Glossary
SafeStream
TM
Gigabit Broadband VPN Router User GuideTL-R600VPN
44
z DH3: 1536 bits
¾ Pre-shared Key: The Pre-shared Key for IKE authentication, and ensure both the two peers
use the same key. The key should consist of visible characters without blank space.
To add/modify an IKE entry:
Step 1: Click Add New…/Modify shown in Figure 4-38, you will see a new screen shown in
Figure 4-39.
Step 2: Enter the Policy Name, Pre-Shared Key, SA Lifetime and then select the Exchange
Mode, Authentication Algorithm, Encryption Algorithm, DH Group. Then enable or
disable the DPD.
Figure 4-39
Step 3: Click the Save button.
Other configurations for the entries as shown in Figure 4-38:
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to
view the information in the next screen.
4.8.2 IPsec
Choose menu “IPsec VPN → IPsec”, you can configure the related parameters for IPsec
negotiation and view the IPsec policy in the next screen (shown in Figure 4-40).