User Guide
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware installation
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: Specifications
- Appendix B: Preventing Lightning
- Appendix C: FAQ
- Appendix D: Glossary
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide
TM
46
Figure 4-41
¾ Policy Name: Enter the unique name to the IPsec policy for identification and management
purposes.
¾ Local Subnet: Enter the IP address range on your local LAN to identify which PCs on your
LAN are covered by this policy. It's formed by IP address and subnet mask.
¾ Remote Subnet: Enter the IP address range on your remote network to identify which PCs
on the remote network are covered by this policy. It's formed by IP address and subnet mask.
¾ Remote Gateway: Enter the Remote Gateway. It can be IP address or domain name.
Exchange Mode: Select the negotiation mode for the policy.
z IKE: The parameters for the VPN tunnel are generated automatically via
IKE negotiations.
z Manual: All settings (including the keys) for the VPN tunnel are manually
input and no key negotiation is needed.
z IKE Mode
Security Policy:
It is available when IKE is selected as the
negotiation mode. Select the Security Policy for
IPsec.
Authentication Algorithm:
Select the Authentication Algorithm for IPsec
policy. The default value is “Auto”.