User Guide
Table Of Contents
- Chapter 1. Introduction
- Chapter 2. Hardware installation
- Chapter 3. Quick Installation Guide
- Chapter 4. Configuring the Router
- Appendix A: Specifications
- Appendix B: Preventing Lightning
- Appendix C: FAQ
- Appendix D: Glossary
SafeStream
TM
Gigabit Broadband VPN Router User GuideTL-R600VPN
50
¾ MPPE Encryption – Enable or disable the MPPE Encryption. If enabled, the PPTP tunnel
will be encrypted by MPPE.
¾ IP Range Start - Enter the start IP address to define a range for the server's IP assignment.
¾ IP Range End - Enter the end IP address to define a range for the server's IP assignment.
4.9.2 Account Settings
Choose the menu PPTP VPN Server→Account Settings, you can configure the PPTP account
in the next screen (shown in Figure 4-45).
Figure 4-45
¾ Account - Displays the PPTP Account.
¾ Status - Displays the status of the PPTP Server.
To add/modify a PPTP Account rule:
Step 1: Click Add New…/Modify shown in Figure 4-45, you will see a new screen shown in
Figure 4-46.
Step 2: Enter the Account, Password and select the status.
Figure 4-46
Step 3: Click the Save button.
Other configurations for the entries as shown in Figure 4-45.
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.