TL-R600VPN Gigabit Broadband VPN Router REV2.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission fromTP-LINK TECHNOLOGIES CO., LTD. Copyright © 2013 TP-LINK TECHNOLOGIES CO., LTD.
Safety Information z z z When product has power button, the power button is one of the way to shut off the product; When there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. Avoid water and wet locations.
Package Contents The following items should be found in your box: ¾ ¾ ¾ One TL-R600VPN SafeStream Gigabit Broadband VPN Router One Power Cord Resource CD ) Note: 1) 2) The provided power cord may be different due to local power specifications. Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor.
CONTENTS Chapter 1. Introduction ........................................................................................ 1 1.1 Overview of the Router .................................................................................................. 1 1.2 Features......................................................................................................................... 1 1.3 Conventions......................................................................................................
4.8 4.9 4.7.3 Target .............................................................................................................................39 4.7.4 Schedule ........................................................................................................................40 IPsec VPN ................................................................................................................... 41 4.8.1 IKE................................................................................
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Chapter 1. Introduction 1.1 Overview of the Router The TL-R600VPN SafeStream Gigabit Broadband VPN Router from TP-LINK provides multiple VPN protocols and high VPN performance. Abundant security strategies, such as SPI firewall, protect your network against the attacks and Access Control, provide online behavior management. Anymore, web-based management makes the network setup be an easy work.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Chapter 2. Hardware Installation 2.1 Panel Layout 2.1.1 The Front Panel The router’s LEDs are located on the front panel (Viewed from left to right). Figure 2-1 LED Descriptions: Name PWR SYS Status Indication Not lit The router is powered off. Lit up (Green) The router is powered on. Not lit The router has a hardware error. Lit up (Green) The router has a hardware error. Flashing (Green) Not lit The router works properly.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Method one: Use the Factory Defaults function on System Tools -> Factory Defaults page in the router's Web-based Utility. Method two: With the router powered on, use a pin to press and hold the RESET button (about 5 seconds) until the SYS LED lights up and flashes. And then release the button and wait the router to reboot to its factory default settings. ) Note: 1) 2) Please use only the power cord provided with this router.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide ) Note: If you intend to connect the router to the ground via the PE（Protecting Earth）cable of AC power cord, please make sure the PE（Protecting Earth）cable in the electrical outlet is well grounded in advance. 2.5 Connecting the Router Before you install the router, you should connect your PC to the Internet through your broadband service successfully. If there is any problem, please contact your ISP for help.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Chapter 3. Quick Installation Guide This chapter describes how to configure the basic functions of your TL-R600VPN SafeStream Gigabit Broadband VPN Router. These procedures only take you a few minutes. You can access the Internet via the router immediately after it has been successfully configured. 3.1 Configure PC Step 1: Click the Start menu on your desktop, right click My Network Places, and then select Properties (shown in Figure 3-1).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 3-2 Step 3: In the next screen, select General tab, highlight Internet Protocol (TCP/IP), and then click the Properties button.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Step 4: Configure the IP address as shown in Figure 3-4. After that, click OK. Figure 3-4 ) Note: You can configure the PC to get an IP address automatically, select “Obtain an IP address automatically” and “Obtain DNS server address automatically” in the screen above. For Windows 98 OS or earlier, the PC and router may need to be restarted. Now, you can run the Ping command in the command prompt to verify the network connection.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide If the result displayed is similar to the screen shown below, it means that your PC has not connected to the router. Figure 3-6 You can check it follow the steps below: ) Note: 1) Is the connection between your PC and the router correct? The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should be lit. 2) Is the TCP/IP configuration for your PC correct? If the router's IP address is 192.168.0.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 3-7 ) Note: If the above screen (Figure 3-7) does not prompt, it means that your web-browser may be set to a proxy. Choose Tools menu→Internet Options→Connections→LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it. Step 1: Select the Quick Setup tab on the left of the main menu and the “Quick Setup” screen will appear. Click the Next button.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide ) Note: Four ways to connect to Internet are provided in Quick Setup. Please select one compatible with your ISP. If you are given another way not listed here, refer to Network→ WAN for detailed list. Step 3: If Auto-Detect is chosen, the router will detect the Internet connection type provided by your ISP automatically. Figure 3-10 Step 4: If you choose PPPoE, you will see the screen as shown in Figure 3-11.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Step 7: After that, you will see the next screen. Click Finish to complete the quick installation.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Chapter 4. Configuring the Router It is recommended to use the “Quick Installation Guide” for first-time installation. For advanced users, if you want to know more about this device and make use of its functions adequately, you need to read this chapter and configure advanced settings though the Web-based Utility. After a successful login, you can configure and manage the router. There are main menus on the left of the Web-based Utility.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-1 ¾ LAN - This field displays the current information for the LAN, including the “MAC Address”, “IP Address” and “Subnet Mask”. ¾ WAN - This field displays the parameters applied to the WAN port of the router, including “MAC Address”, “IP Address”, “Subnet Mask”, “Default Gateway” and so on.
TL-R600VPN 4.2 SafeStream Gigabit Broadband VPN Router User Guide Quick Setup Please refer to chapter 3"Quick Installation Guide". 4.3 Network Choose menu Network, the next submenus are shown below. Figure 4-2 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.3.1 WAN Choose menu Network→WAN, you can configure the IP parameters of the WAN on the screen below.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-3 ¾ MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely required, and should not be done unless you are sure it is necessary for your ISP connection.
TL-R600VPN 2. SafeStream Gigabit Broadband VPN Router User Guide Static IP If you are given a fixed IP (static IP), please select Static IP (shown in Figure 4-4), and then fixed IP parameters specified by your ISP. Figure 4-4 ¾ IP Address - Enter the IP address in dotted-decimal notation provided by your ISP. ¾ Subnet Mask - Enter the subnet Mask in dotted-decimal notation provided by your ISP, usually is 255.255.255.0.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-5 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of inactivity (Max Idle Time).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide ) Note: Only you have set the system time on System Tools→Time screen, will the Time-based Connecting function take effect. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually. After a specified period of inactivity (Max Idle Time), the router will disconnect your Internet connection, and not be able to re-establish your connection automatically even though you attempt to access the Internet again.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide ISP Specified IP Address - If you know that your ISP does not automatically transmit your IP address to the router during login, select Use IP Address specified by ISP and enter the IP address in dotted-decimal notation, which your ISP provided. ¾ Detect Online Interval - The default value is 0, you can input the value between 0 and 120. The router will detect Access Concentrator online at every interval between the times.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time). If your Internet connection has been terminated due to inactivity, Connect on Demand enables the router to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-8 ¾ User Name/Password - Enter the User Name and Password provided by your ISP. These fields are case-sensitive. ¾ Connect on Demand - You can configure the router to disconnect your Internet connection after a specified period of the Internet connectivity (Max Idle Time).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Otherwise, enter the number in minutes that you wish to have the Internet connecting last unless a new link requested. ) Note: Sometimes the connection cannot be disconnected although you specify a time to Max Idle Time because some applications visit the Internet continually in the background. 6. PPTP/Russia PPTP If your ISP provides PPTP connection, please select PPTP/Russia PPTP option.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide enter the number of minutes you want to have elapsed before your Internet connection terminates. ¾ Connect Automatically - Connect automatically after the router is disconnected. To use this option, click the radio button. ¾ Connect Manually - You can configure the router to make it connect or disconnect manually.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Server and DMZ Host may change accordingly at the same time; you’d better re-configure it as well. 4.3.3 MAC Clone Choose menu Network→MAC Clone, you can configure the MAC address of the WAN on the screen below (shown in Figure 4-11). Some ISPs require that you register the MAC address of your adapter, which is connected to your cable, DSL modem or Ethernet during installation. You do not generally need to change anything here.
TL-R600VPN 4.4 SafeStream Gigabit Broadband VPN Router User Guide DHCP Choose menu DHCP, the next submenus are shown below. Figure 4-12 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.4.1 DHCP Settings Choose menu DHCP→DHCP Settings, you can configure the DHCP in the next screen (shown in Figure 4-13).
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Address Lease Time - This is the amount of time in which a network user will be allowed connection to the router with their current dynamic IP address. Enter the amount of time (in minutes), the range of the time is 1 ~ 2880 minutes. The default value is 120 minutes. ¾ Default Gateway - Suggest inputting the IP address of the LAN port of the router, default value is 192.168.0.1.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-15 ¾ MAC Address - This field displays the MAC address of the PC for which you want to reserve IP address. ¾ Assigned IP Address - This field displays the IP address of the router reserved. ¾ Status - This field displays the status of the virtual server entry. Enabled means that the entry will take effect, Disabled means that the entry will not take effect.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.5 Forwarding Choose menu “Forwarding”, the next submenus are shown below. Figure 4-17 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.5.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Status - This field displays the status of the virtual server entry. Enabled means that the entry will take effect, Disabled means that the entry will not take effect. To add/modify a virtual server entry: Step 1: Click Add New…/Modify shown in Figure 4-18, you will see a new screen shown in Figure 4-19.
TL-R600VPN 4.5.2 SafeStream Gigabit Broadband VPN Router User Guide Port Triggering Choose menu Forwarding→Port Triggering, you can view and add port triggering in the next screen (shown in Figure 4-20). Some applications require multiple connections, like Internet games, video conferencing, Internet calling and so on. These applications cannot work with a pure NAT router. Port Triggering is used for some of these applications that can work with an NAT router.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Step 2: Select the application you want from the “Common Applications”, then the Trigger port and Incoming ports will be added to the corresponding field automatically, you only need to configure the Trigger protocol and Incoming Protocol for the entry; If the “Common Applications” does not contain the applications that you want, please configure these options manually.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP address assigned to it because its IP address may change when using the DHCP function. Figure 4-22 To assign a computer or server to be a DMZ server: Step 1: Click the Enable radio button Step 2: Enter the local host IP address in the DMZ Host IP Address field Step 3: Click the Save button.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide App Description - This displays the description provided by the application in the UPnP request. ¾ External Port - This displays the external port, which the router opened for the application. ¾ Protocol - This displays the protocol for the application. ¾ Internal Port - This displays the internal port, which the router opened for local host. ¾ IP Address - The UPnP device that is currently accessing the router.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Firewall - Enable the general firewall or not. • SPI Firewall - SPI (Stateful Packet Inspection) keeps track of the state of network connections traveling across it. It distinguishes legitimate packets for different types of connections. Only packets matching a known active connection will be allowed by the firewall; others will be rejected. SPI Firewall is enabled by factory default.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-26 ¾ Packets Statistics Interval - This is the interval for capturing the statistics. ¾ DoS Attack Defense - Enable or disable the DoS Attack Defense. ¾ Enable ICMP-FLOOD Attack Filtering - The attackers flood normal communication by attacking the server with a lot of ICMP packets. Check the box to activate the function to prevent an ICMP Flood attack. The threshold should be within the range of 5-3600 and the default value is 50.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-27 ¾ Management Rules - Here displays the management rules • All the PCs on the LAN are allowed to access the router’s Web-Based Utility: This rule determines that all the PCs connected to the router can visit the router’s Web-Based Utility.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-29 ¾ Enable Internet Access Control: Enable or disable the Internet Access Control. ¾ Default Filter Policy: Select a policy to allow or deny the packets matching the rules to pass through the router. ¾ Rule Name: Display the name of the rule and this name is unique. ¾ Host: Displays the hosts to which the rule takes effect. ¾ Target: Displays the corresponding target of the rule.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-29: Click the Delete button to delete the entry. Click the Enable All button to enable all the entries. Click the Disable All button to disable all the entries. Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.7.3 Target Choose menu Access Control →Target, you can configure Target of the Access Control rule in the next screen (shown in Figure 4-33). Figure 4-33 ¾ Target Description: Displays the description of the target and the description is unique.
TL-R600VPN 4.7.4 SafeStream Gigabit Broadband VPN Router User Guide Schedule Choose menu Access Control →Target, you can configure the effective time of the Access Control rule in the next screen (shown in Figure 4-35). Figure 4-35 ¾ Schedule Description: Displays the description of the schedule and the description is unique. ¾ Day: Displays the day on which the rule takes effect ¾ Time: Displays the time between which the rule takes effect.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide view the information in the next screen. 4.8 IPsec VPN Choose menu IPsec VPN, the next submenus are shown below. Figure 4-37 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.8.1 IKE Choose menu IPsec VPN→IKE, you can configure the related parameters for IKE negotiation and view the IKE policy in the next screen (shown in Figure 4-38).
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Encryption: The encryption algorithm for IKE negotiation. Options include: z DES: DES (Data Encryption Standard) encrypts a 64-bit block of plain text with a 56-bit key. ¾ z 3DES: Triple DES, encrypts a plain text with 168-bit key. z AES128: Uses the AES algorithm and 128-bit key for encryption. z AES192: Uses the AES algorithm and 192-bit key for encryption. z AES256: Uses the AES algorithm and 256-bit key for encryption.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Other configurations for the entries as shown in Figure 4-38: Click the Delete All button to delete all the entries. Click the Previous button to view the information in the previous screen, click the Next button to view the information in the next screen. 4.8.2 IPsec Choose menu IPsec VPN→IPsec, you can configure the related parameters for IPsec negotiation and view the IPsec policy in the next screen (shown in Figure 4-40).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-41 ¾ Policy Name: Enter the unique name to the IPsec policy for identification and management purposes. ¾ Local Subnet: Enter the IP address range on your local LAN to identify which PCs on your LAN are covered by this policy. It's formed by IP address and subnet mask. ¾ Remote Subnet: Enter the IP address range on your remote network to identify which PCs on the remote network are covered by this policy.
TL-R600VPN Encryption Algorithm: SafeStream Gigabit Broadband VPN Router User Guide Select the Encryption Algorithm for IPsec policy. The default value is “Auto”. IKE Security Policy: Select the IKE Security Policy for IPsec policy. PFS Group: Select the PFS (Perfect Forward Security) for IKE mode to enhance security. This setting should match the remote peer. With PFS feature, IKE negotiates to create a new key in Phase2.
TL-R600VPN In Encryption Key: SafeStream Gigabit Broadband VPN Router User Guide Specify the Inbound Encryption Key manually if ESP protocol The inbound key here must match the outbound Encryption Key at the other end of the tunnel, and vice versa. Outgoing SPI: Specify the Outgoing SPI (Security Parameter Index) manually. The Outgoing SPI here must match the Incoming SPI value at the other end of the tunnel, and vice versa.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide IPsec tunnel is successfully established. The ingoing SPI value and outgoing SPI value are different. However, the Incoming SPI value must match the Outgoing SPI value at the other end of the tunnel, and vice versa. The connection status on the remote endpoint of this tunnel is as the following figure shows. The SPI value is obtained via auto-negotiation. 4.9 PPTP VPN Server Choose menu PPTP VPN Server, the next submenus are shown below.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-45 ¾ Account - Displays the PPTP Account. ¾ Status - Displays the status of the PPTP Server. To add/modify a PPTP Account rule: Step 1: Click Add New…/Modify shown in Figure 4-45, you will see a new screen shown in Figure 4-46. Step 2: Enter the Account, Password and select the status. Figure 4-46 Step 3: Click the Save button. Other configurations for the entries as shown in Figure 4-45.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-47 ¾ Remote IP Address – Displays the original IP address of the remote client. ¾ PPTP IP Address – Displays the IP address the PPTP Server assigned to the remote client. ¾ Online Time – Displays the online time of the PPTP Server. 4.10 Advanced Routing Choose menu Advanced Routing, the next submenus are shown below. Figure 4-48 4.10.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide To add/modify a static routing entry: Step 1: Click Add New…/Modify shown in Figure 4-49, you will see a new screen shown in Figure 4-50. Step 2: Enter the appropriate Destination IP Address, Subnet Mask and Default Gateway, and then select the status. Figure 4-50 Step 3: Click Save to make the entry take effect. ) Note: If you want to add more than one static route, please go to step 1 to continue.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Subnet Mask - The Subnet Mask determines which portion of an IP address is the network portion, and which portion is the host portion. ¾ Gateway - This is the IP address of the gateway device that allows for contact between the router and the network or host. ¾ Interface - This interface tells you whether the Destination IP Address is on the LAN (internal wired networks), the WAN (Internet). 4.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-54 ¾ Description - This is the information about the rules such as address range. ¾ Egress bandwidth - This field displays the max and mix upload bandwidth through the WAN port, the default is 0. ¾ Ingress bandwidth - This field displays the max and mix download bandwidth through the WAN port, the default is 0. ¾ Enable - This displays the status of the rule.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide 4.12 IP & MAC Binding Choose menu IP & MAC Binding, the next submenus are shown below. Figure 4-56 Click any of them, and you will be able to configure the corresponding function. The detailed explanations for each submenu are provided below. 4.12.1 Binding Setting Choose menu IP & MAC Binding→Binding Setting, you can view and add IP & MAC binding entries in the next screen (shown in Figure 4-57).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Step 3: Select Bind the MAC and IP address, and then click Save button to save the configuration. To find a specific IP & MAC binding entry: Step 1: Click Find shown in Figure 4-57, you will see a new screen shown in Figure 4-59. Step 2: Enter the specific MAC Address or IP Address in the corresponding field. Figure 4-59 Step 3: Click Find button, then you will see the entry with the specific MAC address or IP address.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide 4.12.2 ARP List Choose menu IP & MAC Binding→ARP List, you can view the ARP list in the next screen (shown in Figure 4-60). This screen displays the ARP list, it shows all the existing IP & MAC Binding entries. To manage the computer, you could observe the computers in the LAN by checking the relationship of MAC address and IP address on the ARP list, and you could configure the items on the ARP list also.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-61 ¾ Connection Status - The status of the DDNS service is displayed here. To set up for Dyndns DDNS, follow these instructions: Step 1: Type the “User Name” and “Password” for your DDNS account. Step 2: Enter the domain name that your dynamic DNS service provider offers. Step 3: Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide To set up for PeanutHull DDNS, follow these instructions: Step 1: Type the User Name and Password for your DDNS account. Step 2: Enable DDNS, and click Save to save the current configuration. Click the Login button to login to the DDNS service. Click Logout to logout of the DDNS service. The status of the DDNS service connection is displayed in the Connection Status field. 4.13.3 Comexe DDNS If your dynamic DNS Service Provider is www.comexe.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-64 To set up for No-IP DDNS, follow these instructions: Step 1 Type the “User Name” and “Password” for your DDNS account. Step 2 Enter the Domain Name your dynamic DNS service provider offered. Step 3 Enable DDNS, and click Save to save the current configuration. Click Login to login the DDNS service. Click Logout to logout the DDNS service. The status of the DDNS service connection is displayed in the Connection Status field. 4.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-66 ¾ Time zone - Select your local time zone from this pull down list. ¾ Date - Enter your local date in MM/DD/YY into the right blanks. ¾ Time - Enter your local time in HH/MM/SS into the right blanks. ¾ Start- Select starting time of Daylight Saving Time. ¾ End- Select ending time of Daylight Saving Time. To configure the system time manually: Step 1: Select your local time zone.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide ) Note: 1). This setting will be used for some time-based functions such as firewall. You must specify your time zone once you login to the router successfully, or else, the time limited on these functions will not take effect. 2). The time will be lost if the router is turned off. 3). The router will obtain GMT time automatically from Internet if it has already connected to the Internet. 4).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide ) Note: 1). Only one user can use these tools at one time. 2). These two functions may take several seconds sometimes, please wait. 3). Options "Number of Pings", "Ping size" and "Ping Timeout" are available for Ping function. 4). Option "Traceroute Hops" is available for Traceroute function. 4.14.3 Firmware Choose menu System Tools→Firmware, you can update the latest version of firmware for the router on the screen (shown in Figure 4-68).
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide 4.14.4 Factory Defaults Choose menu System Tools→Factory Defaults, you can restore the configurations of the router to factory defaults on the screen (shown in Figure 4-69). Figure 4-69 Click the Restore button to reset all configuration settings to their default values. ) Note: 1) The default User Name is admin. 2) The default Password is admin. 3) The default IP Address is 192.168.0.1. 4) The default Subnet Mask is 255.255.255.0.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-71 Step 2: Save the file as the appointed file (shown in Figure 4-72). Figure 4-72 To restore the router’s settings: Step 1: Click the Browse button to locate the update file for the device, or enter the exact path to the Setting file in the text box. Step 2: Click the Restore button to complete. 4.14.6 Reboot Choose menu System Tools→Reboot, click the Reboot button to reboot the router via the next screen.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4-73 ) Note: Some settings of the router will take effect only after rebooting, which include: 1) Change LAN IP Address. (System will reboot automatically) 2) MAC Clone (system will reboot automatically) 3) DHCP service function. 4) Static address assignment of DHCP server. 5) Web Service Port of the router. 6) Upgrade the firmware of the router (system will reboot automatically).
TL-R600VPN 3) SafeStream Gigabit Broadband VPN Router User Guide You can click the Clean All button to clean all the configurations. 4.14.8 System Log Choose menu System Tools→System Log, you can view the logs of the router. Figure 4-75 The router can keep logs of all traffic. You can query the logs to find what happened to the router. Click the Refresh button to refresh the logs. Click the Save Log button to save all the logs in a text file.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Web Management Port - Web browser access normally uses the standard HTTP service port 80. This router’s default remote management web port number is 80. For greater security, you can change the remote management web interface to a custom port by entering that number in the box provided. Choose a number between 1024 and 65534, but do not use the number of any common service port.
TL-R600VPN ¾ SafeStream Gigabit Broadband VPN Router User Guide Packets Statistics Interval - The default value is 10. Select a value between 5 and 60 seconds in the pull-down list. The Packets Statistic interval value indicates the time section of the packets statistic. ¾ Sort Rules - Select the rule for displaying the traffic information. ¾ Statistics Table - This table displays the statistics information about the traffic.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Appendix A: Specifications General Standards and Protocols IEEE 802.3、IEEE 802.3u、IEEE 802.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Appendix B: Preventing Lightning To avoid damage during a lightning storm and ensure a stable performance, our router has adopted the professional lightning protection technology to prevent the lightning. However, although these measures have been taken to protect TL-R600VPN from lightning, if the lightning intensity exceeds a certain range, damage to the router may still happen.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Appendix C: FAQ 1. How do I configure the router to access Internet by ADSL users? Step 1: First, configure the ADSL modem in RFC1483 bridge model. Step 2: Connect the Ethernet cable from your ADSL modem to the WAN port on the router. The telephone cord plugs into the Line port of the ADSL modem. Step 3: Login to the router, click the menu Network→WAN on the left of your browser.
TL-R600VPN 2. SafeStream Gigabit Broadband VPN Router User Guide How do I configure the router to access Internet by Ethernet users? Step 1: Login to the router, click the menu Network→WAN on the left of your browser, On the WAN screen, select “Dynamic IP” for "WAN Connection Type", and finish it by clicking Save. Step 2: Some ISPs require that you register the MAC address of your adapter, which is connected to your cable or DSL modem during installation.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 4 ) Note: Your opposite side should call your WAN IP, which is displayed on the “Status” page. Method two: Use DMZ Host Login to the router, click the menu Forwarding→DMZ. On the DMZ screen, select “Enable”, and enter your IP address into the “DMZ Host IP Address” field (using 192.168.0.102 as an example), then to click the Save button. Figure 5 4.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Figure 6 ) Note: If the above configuration takes effect, you should login the router by entering http://192.168.0.1:88 (the router’s LAN IP address: Web Management Port) in the address field of the web browser.
TL-R600VPN SafeStream Gigabit Broadband VPN Router User Guide Appendix D: Glossary ¾ DDNS (Dynamic Domain Name System) - The capability of assigning a fixed host and domain name to a dynamic Internet IP address. ¾ DHCP (Dynamic Host Configuration Protocol) - A protocol that automatically configure the TCP/IP parameters for the all the PCs that are connected to a DHCP server.
