User manual

Installation Guide
TL-R600VPN
Gigabit Multi-WAN VPN Router
LED Explanation
Package List
TL-R600VPN
Connection
Conguration
Installation Guide
Power Adapter
Ethernet Cable
TL-R600VPN
7106507384 REV4.0.0
1
Modem
Internet
Connect the WAN port of the
router to the cable or the DSL
modem with an Ethernet cable.
Connect the LAN port of the
router to the computer with
an Ethernet cable.
PC
2
Connect the AC power socket on
the router to an electrical outlet
with the power adapter provided.
3
On: Power on
O: Power o
Power
Flashing: System running normally
On/O: System running abnormally
System
On: An inactive 100Mbps/1000Mbps
device is linked
Flashing: Transmitting/receiving data
O:
An inactive 10Mbps device is
linked or no device is linked
Link/Act
3. Create a username and a password for subsequent login attempts.
2. Open a web browser and type the default management address
http://192.168.0.1 in the address eld of the browser, then press the
Enter key.
1. Connect a PC to a LAN port of the router with a RJ45 cable properly. If
your computer is congured with a xed IP, change it to "Obtain an IP
address automatically".