User manual
Appendix: Troubleshooting
With the router powered on, use a pin to press and hold the RESET button
(for about 5 seconds) until the System LED lights up and ashes quickly.
Then release the button and wait while the router reboots, restoring it to its
factory default settings.
You can restore the router to factory defaults. The default management
address of the router is http://192.168.0.1. You can manually set a new
username and password for login. All current settings will be cleared once the
router is restored. If you have a backup of your congurations, you can import
it after the factory restore is completed.
What should I do if I forget the user name and password for the
router's web management page?
How do I restore the router to its factory default settings?
Log in to the web management page of the router. Go to System Tools >
Management > Factory Default Restore, and click Factory Restore. The
router will restore and reboot automatically.
Why is the web management page not displaying properly?
Please try the following:
1) Update your web browser or try a dierent web browser.
2) If pop-ups are being blocked, please lower the security level of your web
browser.
What should I do if I can't access the web management page?
If the computer is set to a static or xed IP address, change its settings to
obtain an IP address automatically.
Enter http://192.168.0.1 in the web browser and press Enter.
Use another web browser and try again.
Reboot your router and try again.
Disable then enable the network adapter being used.
Why is the Power LED working abnormally?
The Power LED should be lit when the power system is working normally.
If it is not, please check the following:
1) Make sure that the power cable is connected properly, and the power
contact is normal.
2) Make sure the voltage of the power supply meets the requirements for
the input voltage of the router.
©2017 TP-Link
•
When product has power button, the power button is one of the way to shut o the product; when there is no
power button, the only way to completely shut o power is to disconnect the product or the power adapter
from the power source.
•
Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the
limited warranty. If you need service, please contact us.
•
Avoid water and wet locations.
Safety Information
TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant
provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.
The original EU declaration of conformity may be found at http://www.tp-link.com/en/ce.
CE DOC
この装置は、クラスB情報技術装置です。この装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョ
ン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをしてください。
VCCI-B
4. Use the username and password set above to log in to the webpage. 5. After a successful login, the main page will appear as shown below, and you
can congure the function by clicking the setup menu on the left side of the
screen.
For technical support and other information, please visit
http://www.tp-link.com/support, or simply scan the QR code.