User Guide TL-SG1005D TL-SG1008D 5/8-Port Gigabit Desktop Switch Rev:2.0.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2011 TP-LINK TECHNOLOGIES CO., LTD.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1） This device may not cause harmful interference. 2） This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
Package Contents The following items should be found in your package: ¾ One TL-SG1005D/TL-SG1008D Switch ¾ One Power Adapter ¾ This User Guide Note: The wall-mounting screws are not provided with our product. Please contact your distributor if any of the listed items are damaged or missing. Convention The Switch or TL-SG1005D/TL-SG1008D mentioned in this User Guide stands for TL-SG1005D/TL-SG1008D 5/8-port Gigabit Desktop Switch without any explanation.
Chapter 1 Introduction of the Product Thank you for choosing the TL-SG1005D/TL-SG1008D 5/8-port Gigabit Desktop Switch. 1.1 Overview of the Product Powered by the Gigabit Ethernet Technology, TL-SG1005D/ TL-SG1008D Gigabit Desktop Switch provides the seamless network connection, which can speed up your old network to 1000Mbps, ensuring the graphics, CGI, CAD, or multimedia files and other applications with bandwidth-intensive files transferred across the network almost instantly.
1.2 Features ¾ Supports Green Ethernet technology to implement power saving features ¾ Complies with standards IEEE802.3, IEEE802.3u, IEEE802.3ab ¾ 5/8 10/100/1000Mbps Auto-Sensing RJ45 ports supporting Auto-MDI/MDIX ¾ Supports IEEE802.
The Switch’s LEDs are located on the front panel: ¾ Power LED: This indicator will light up when the Switch powers up. ¾ LEDs (1~8): The LED indicates Link/Active status. The corresponding LED indicator will light solid green when connected to a network device. It flashes green when data is being transmitted or received on the working connection. Note: The LEDs’ description above explains the device’s working status after initialization. 2.
Chapter 3 Installation The Switch can be either located on a desktop or mounted on a wall. 3.1 Mounting the Switch on a Desk To locate the Switch on a desktop, please follow these steps: 1) Place the Switch on a flat desk. 2) Inspect the Power Adapter carefully and make sure that it is properly connected to a power source. 3) Ensure adequate ventilation space around the switch for dissipating heat and air. Note: Please avoid any heavy thing placed on the switch.
3.3 Power On Power on the Switch and it will automatically initialize and its LED indicators will respond as follows: Name Time Power All the time On Power on st On N/A nd Off N/A Off No device connected to the corresponding port. On There is a 10/100/1000Mbps device connected to the corresponding port. 1 second LEDs (port 1-8) Status Indication 2 second rd 3 second~ Note:! If the LED indicators don’t respond as described above, please check the power supply and its connection.
Appendix A: Specifications General Standards IEEE802.3, IEEE802.3u, IEEE802.
10Base-T: 14880pps/Port Frame Forward Rate 100Base-Tx: 148800pps/Port 1000Base-T: 1488000pps/Port Environmental and Physical Operating Temperature 0 ~40℃ (32 ~104℉) Storage Temperature -40 ~70℃ (-40 ~158℉) Operating Humidity 10%~90% non-condensing Storage Humidity 5%~90% non-condensing Appendix B: Troubleshooting 1. The Power LED is not lit Check to see if the AC power cord is connected to the Switch properly, and make sure the power source is ON. 2.
