Installation Guide

Installation Guide

5/8/16-Port Gigabit Desktop Switch

On: Power on

O: Power o

LED Explanation

Power

1000M (Green)

On:

Running at 1000 Mbps

10/100M (Yellow)

On:

Running at 10/100 Mbps

Link/Act (For TL-SG116)

Flashing: Transmitting/receiving data

Link/Act (For TL-SG105/TL-SG105S/TL-SG108/TL-SG108S)

Link/Act (Green)

Running at 10/100/1000 Mbps

O:

Flashing:

Transmitting/receiving data

No device is linked to the corresponding port

On:

Flashing: Transmitting/receiving data

Note:

For simplicity, we will take TL-SG108 for example throughout this Guide.

Connection

Ethernet Ports (1-8)

Router

LAN PortWAN Port

Internet

TL-SG108

Power Adapter

Link/Act

PAGE 1
© 2022 TP-Link 7106509649 LED Explanation Power On: Power on Off: Power off Installation Guide Link/Act (For TL-SG105/TL-SG105S/TL-SG108/TL-SG108S) Link/Act (Green) On: Running at 10/100/1000 Mbps Off: No device is linked to the corresponding port Flashing: Transmitting/receiving data Link/Act (For TL-SG116) 1000M (Green) On: Running at 1000 Mbps Flashing: Transmitting/receiving data 10/100M (Yellow) On: Running at 10/100 Mbps Flashing: Transmitting/receiving data Note: For simplicity, we will take TL-
PAGE 2
Specifications Frequently Asked Questions (FAQ) General Specifications Standard Protocol IEEE802.3, IEEE802.3i, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.1p CSMA/CD Ethernet: 10 Mbps (Half Duplex), 20 Mbps (Full Duplex) Data Transfer Rate Fast Ethernet: 100 Mbps (Half Duplex), 200 Mbps (Full Duplex) Gigabit Ethernet: Q1. The Power LED is not lit. The Power LED should be lit when the power system is working normally.