User manual

Easy Smart Configuration Utility User Guide
2
Chapter Introduction
Chapter 3 System This module is used to configure system properties of the
switch. Here mainly introduces:
z System Info: View device information and define the device
description.
z IP Setting: Get and modify the network parameters of the
switch.
z User Account: Modify the username and password for
users to login the Web management page.
z Backup and Restore: Save the current configuration file to
your computer or download a backup configuration file to
your switch.
z System Reboot: Reboot your switch.
z System Reset: Reset the switch to the default.
z Firmware Upgrade: Update the firmware of the switch.
Chapter 4 Switching
This module is used to configure the basic functions of the
switch.
z Port Setting: Configure and view the basic parameters of
each port, including the port status, speed, duplex mode
and flow control.
z IGMP Snooping: Enable IGMP snooping feature and view
the current IGMP Group information.
z Port Trunk: Configure and view the information of the trunk
group of the switch.
Chapter 5 Monitoring This module is used to monitor the traffic information of the
switch, and provide the convenient method to locate and solve
the network problem.
z Port Statistics: View the statistic information of each port.
z Port Mirror: Monitor and mirror network traffic by forwarding
copies of incoming and outgoing packets from one/multiple
ports (mirrored port) to a specific port (mirroring port).
z Cable Test: Diagnose the connection status of the cable
connected to the switch and the distance to the problem
location.
z Loop Prevention: Detect loops using loopback detection
packets, and then display an alert or further block the
corresponding port.