User Guide

© 2017 TP-Link 7106507668 REV2.0.1
Conguration
Using the conguration utility
Using the Web-based GUI
The switch is plug and play. To manage the switch, you can use the
Web-based GUI or the conguration utility.
The utility is provided on the resource CD and only supported on
Windows now.
Double click the switch that you want to congure. Next enter the
username and password (both admin) for it. Then use the utility to
congure the switch.
5.
For more details, see the User Guide and the Easy Smart Conguration
Utility User Guide on the resource CD.
3. Double click the icon on the
desktop, and the utility home page
displays a list of TP-LINK Easy Smart
Switches on the local network.
1. Insert the resource CD into a computer connected to the switch.
2. The resource CD home screen will
appear. If not, double click AutoRun.exe
on the resource CD. Then click Install
Easy Smart Conguration Utility on the
home screen and follow the prompts to
install the program.
Visit the Web-based GUI with the default IP address of the switch
http://192.168.0.1, and log in with admin as both user name and
password. Then congure the switch on the GUI.
2.
Prepare your computer with a static IP address 192.168.0.x ("x" ranges
from 2 to 254), and a subnet mask 255.255.255.0.
1.
Make sure the switch that you want to manage is in the same subnet as
your computer. You can click to congure the switch IP address.
4.
Installation Guide
TL-SG108PE
LED Explanation
Connection
8-Port Gigabit Easy Smart Switch with 4-Port PoE
Ethernet Ports (1-8)
Router
LAN Port
WAN Port
IP Camera AP IP Phone
PoE Devices
Note: PoE ports can also connect to non-PoE devices, but only transmit data.
Maximum PoE power is 15.4W for each PoE port and 55W for all PoE ports.
1.
2.
DC Power Adapter
AC Power Cord
PoE Ports (1-4)
Power
On: Power on
O: Power o
Power
Link/Act and PoE Status
Link/Act(Port 1-8)
On and Green: Running at 1000Mbps
On and Yellow: Running at 10/100Mbps
Flashing: Transmitting/receiving data
PoE Status(Port 1-4)
On: Providing PoE power
Flashing: PoE fault
O: Not providing PoE power
PoE Max
PoE Max
On: 46W ≤ Total power supply < 55W
Flashing: Total power supply = 55W
O: Total power supply < 46W
Internet