Specifications

Configuration Procedure:
 If SNMPv3 is employed, please take the following steps:
Step Operation Description
1 Enable SNMP function globally. Required. On the SNMP→SNMP Config→Global
Config page, enable SNMP function globally.
2 Create SNMP View. Required. On the SNMP→SNMP Config→SNMP
View page, create SNMP View of the management
agent. The default View Name is viewDefault and
the default OID is 1.
3 Create SNMP Group. Required. On the SNMP→SNMP Config→SNMP
Group page, create SNMP Group for SNMPv3 and
specify SNMP Views with various access levels for
SNMP Group.
4 Create SNMP User. Required. On the SNMP→SNMP Config→SNMP
User page, create SNMP User in the Group and
configure the auth/privacy mode and auth/privacy
password for the User.
 If SNMPv1 or SNMPv2c is employed, please take the following steps:
Step Operation Description
1 Enable SNMP function globally. Required. On the SNMP→SNMP
Config→Global Config page, enable SNMP
function globally.
2 Create SNMP View. Required. On the SNMP→SNMP
Config→SNMP View page, create SNMP
View of the management agent. The default
View Name is viewDefault and the default
OID is 1.
Create SNMP
Community
directly.
3
Configure
access
level for the
User.
Create SNMP
Group and
SNMP User.
Required alternatively.
 Create SNMP Community directly.
On the SNMP→SNMP Config→SNMP
Community page, create SNMP
Community based on SNMP v1 and
SNMP v2c.
 Create SNMP Group and SNMP User.
Similar to the configuration way based
on SNMPv3, you can create SNMP
Group and SNMP User of SNMP v1/v2c.
The User name can limit access to the
SNMP agent from SNMP network
management station, functioning as a
community name. The users can
manage the device via the Read View,
Write View and Notify View defined in
the SNMP Group.
102