User Guide

Multicast VLAN:
Enable or disable multicast VLAN function. When multicast
VLAN is enabled, all multicast data will fo
rward in this VLAN if
this port belongs to the VLAN.
Multicast VLAN ID: Enter the multicast VLAN ID.
Note:
1. When Unknown Multicast Filter is configured, the Unknown Multicast function in IGMP
Snooping is also configured at the same time.
2. Configurations of the Router Port Aging Time and Member Port Aging Time in 8.2.2 VLAN
Config override their global configurations here.
3. Before creating a Multicast VLAN, you should enable the MLD snooping function in th is VLAN
in 8.2.2 VLAN Config.
Configuration Procedure of Multicast VLAN:
Step Operation Description
1 Create VLAN. Required. On the VLAN →802.1Q VLAN →VLAN Config
page, click the Cre ate
button to create a VLAN. Enter the
VLAN ID and the des
cription for the VLAN. Meanwhile,
specify its member ports.
2
Enable MLD Snooping
globally.
Required. On the Multicast →M LD Snooping →Global
Config page, enable the MLD Snooping function globally.
3 Enable MLD Snooping in the
VLAN.
Required. On the Multicast →MLD Snooping →VLAN
Config page,
specify the VLAN ID as the VLAN created in
step 1.
4 Enable the Multicast VLAN. Required. On the Multicast →M LD Snooping →Global
Config page, enable the Multicast VLAN
function and
specify the Multicast VLAN ID as the VL
AN specified in
Step 1.
8.2.2 VLAN Config
On this page you can configure MLD Snooping function with each single VLAN. You need to
create VLAN if you want to enable MLD Snooping function in this VLAN.
110