CLI Reference Guide

TL-SG3424# tracert 192.168.0.131 20
Test the connectivity between the switch and the network device with the IP
fe80::1234. If the destination device has not been found after 20 maxHops, the
connection between the switch and the destination device is failed to establish:
TL-SG3424# tracert fe80::1234 20
show system-time
Description
The show syste m-ti me command is used to display the current time system
and its source.
Syntax
show system-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the time information of the switch:
TL-SG3424# show system-time
show system-time dst
Description
The show system-time dst command is used to display the DST time
information of the switch.
Syntax
show system-time dst
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the DST time information of the switch
TL-SG3424# show system-time dst
124