CLI Reference Guide

The value is in the unit of 0.1 watt. For instance, if you want to configure the max
power as 5w, you should enter 50. “Auto” indicates the value is assigned
automatically by the PoE switch. “Class1” represents 4w. “Class2” represents
7w. “Class3” represents 15.4w. “Class4” represents 30w.
Command Mode
Global Configuration Mode
Example
Create a PoE profile named “IP Camera” whose PoE status is “enable”, PoE
priority is “low” and the power limit is “5w”:
TL-SG3424P(config)# power profile “IP Camera” supply enable priority low
consumption 50
power time-range
Description
The po we r t ime -range command is used to create PoE time-range for the
switch and enter Power Time-range Create Configuration Mode. After a PoE
time-range is created, you need to specify the date and time which has three
mode options available: absolute, periodic and holiday. A PoE time-range can
implement multiple time-ranges simultaneously as long as they do not conflict
with each other. To delete the corresponding PoE time-range configuration,
please use no power time-range command. The PoE time-range determines
the power supply time of the switch. You can specify a PoE time-range for each
PoE port individually.
Syntax
power time-range name
no power time-range name
Parameter
name —— The PoE time-range name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Create a PoE time-range named “tRange1” for the switch:
164