CLI Reference Guide

to take effect is tSeg1, and the packets match this rule will be forwarded by the
switch:
TL-SG3424(config)# mac access-list 20
TL-SG3424(config-mac-acl)# rule 10 permit smac 00:01:3F:48:16:23 smask
11:11:11:11:11:00 vid 2 pri 5 tseg tSeg1
access-list policy name
Description
The access-list policy name command is used to add Policy. To delete the
corresponding Policy, please use no access-list policy name command. A
Policy is used to control the data packets those match the corresponding ACL
rules by configuring ACLs and actions together for effect. The operations here
include stream mirror, stream condition, QoS Remarking and redirect.
Syntax
access-list policy name name
no access-list policy name name
Parameter
name —— The Policy Name, ranging from 1 to 16 characters.
Command Mode
Global Configuration Mode
Example
Add a Policy named policy1:
TL-SG3424(config)# access-list policy name policy1
access-list policy action
Description
The acce ss-list policy action command is used to add ACLs and create
actions for the policy. To set the detailed configuration of actions for a policy,
please use acce ss-list policy action command to access Action Configuration
Mode. To delete the corresponding actions, please use no acce ss-list policy
action command.
182