CLI Reference Guide

Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Specify the maximum number of multicast groups for ports 2-5 to join in as 10:
TL-SG3424(config)# interface range gigabitEthernet 1/0/2-5
TL-SG3424(config-if-range)# ip igmp snooping filter maxgroup 10
ip igmp snooping filter mode
Description
The ip igmp snooping filter mode command is used to configure the Action
mode for the desired port.
Syntax
ip igmp snooping filter mode mode
Parameter
mode —— Action Mode, with refuse and accept options. Refuse indicates only
the multicast packets whose multicast IP is not in the IP-range will be processed,
while accept indicates only the multicast packets whose multicast IP is in the
IP-range will be processed. By default, the option is “accept”.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Specify the Action Mode as accept for port 3:
TL-SG3424(config)# interface gigabitEthernet 1/0/3
TL-SG3424(config-if)# ip igmp snooping filter mode accept
show ip igmp snooping
Description
The show ip igmp snooping command is used to display the global
configuration of IGMP snooping.
214