CLI Reference Guide

ipv6 mld snooping last-listener query-count
Description
The ipv6 mld snooping last-listener query-count command is used to specify
the numbers of Specific Query Message to be sent. The default value is 2. To
restore the default number, please use no ipv 6 mld snooping last-listener
query-count command.
Syntax
ipv6 mld snooping last-listener query-count num
no ipv6 mld snooping last-listener query-count
Parameter
num —— Specify the numbers of Specific Query Message to be sent, ranging
from 1 to 7.
Command Mode
Global Configuration Mode
Example
Specify the number of Specific Query Message to 3:
TL-SG3424(config)# ipv6 mld snooping last-listener query-count 3
ipv6 mld snooping multicast-vlan
Description
The ipv6 mld snooping multicast-v lan command is used to enable the
multicast VLAN function. To disable this function, please use no ipv 6 mld
snooping multicast-vlan command. By default it is disabled.
Syntax
ipv6 mld snooping multicast-vlan
no ipv6 mld snooping multicast-vlan
Command Mode
Global Configuration Mode
Example
Enable multicast VLAN:
TL-SG3424(config)# ipv6 mld snooping multicast-vlan
222