Manualshelf

CLI Reference Guide

ManualsBrandsTP-Link ManualsSwitcheTP-Link TL-SG3216 V1
241242243244245246247248249250
Syntax
ipv6 mld snooping querier vlan vlan-id
no ipv6 mld snooping querier v lan vlan-id
Parameter
vlan-id —— The VLAN that enables the MLD querier function, ranging from 1 to
4094.
Command Mode
Global Configuration Mode
Example
Enable MLD Querier function on VLAN 2:
TL-SG3424(config)# ipv6 mld snooping querier vlan 2
ipv6 mld snooping querier vlan max-response-time
Description
The ipv6 mld snooping querier vlan max-re sponse -t i me command is used to
specify the max response time of the Query message. The default value is 10
seconds. To restore the default value, please use no ipv 6 mld snooping
querier vlan max-response-time command.
Syntax
ipv6 mld snooping querier vlan vlan-id max-re sponse-time time
no ipv6 mld snooping querier vlan vlan-id max-re sponse-time
Parameter
vlan-id —— The VLAN that enables the MLD Querier function, ranging from 1 to
4094.
time —— Specify the time in seconds, ranging from 1 to 25.
Command Mode
Global Configuration Mode
Example
Specify the max response time as 10s on VLAN 2:
TL-SG3424(config)# ipv6 mld snooping querier vlan 2 max-re sponse -time
10
227