CLI Reference Guide

3. When entering enable command to access Privileged EXEC Mode, you are required to give

the password 123 you have set through Console port connection.

Figure 1-15 Enter into the Privileged EXEC Mode

Now you can manage your switch with CLI commands through Telnet connection.

Note:

You can refer to Chapter 9 User Manage Commands

for detailed commands information of the

Telnet connection configuration.

1.1.4 Logon by SSH

To log on by SSH, a Putty client software is recommended. There are two authentication modes to

set up an SSH connection:

Password Authentication Mode: It requires username and password, which are both admin by

default.

Key Authentication Mode: It requires a public key for the switch and a private key for the SSH

client software. You can generate the public key and the private key through Putty Key Generator.