CLI Reference Guide

owner-name —— The owner of the history sample entry, ranging from 1 to 16
characters. By default, it is “monitor”.
Command Mode
Global Configuration Mode
Example
Configure the sample port as Gi1/0/2 and the sample interval as 100 seconds for
the entry 1-3:
TL-SG3424(config)# rmon history 1-3 interface gigabitEthernet 1/0/2
interval 100 owner owner1
rmon event
Description
The rmon eve nt command is used to configure the entries of SNMP-RMON
Event. To return to the default configuration, please use no rmon event
command. Event Group, as one of the commonly used RMON Groups, is used
to define RMON events. Alarms occur when an event is detected.
Syntax
rmon event index [ user user-name ] [ de scriptio n descript ] [ type { none | log |
notify | log-notify }] [ owner owner-name ]
no rmon event index
Parameter
index —— The index number of the event entry, ranging from 1 to 12. You can
only select one entry for each command.
user-name —— The name of the User to which the event belongs, ranging from
1 to 16 characters. By default, it is “public”.
descript —— The description of the event, ranging from 1 to 16 characters. By
default, it is empty.
type —— The event type, with none, log, notify and both options. None indicates
no processing, log indicates logging the event, notify indicates sending trap
messages to the management station, and both indicates logging the event and
sending trap messages to the management station.
owner-name —— The owner of the event entry, ranging from 1 to 16 characters.
By default, it is “monitor”.
248