CLI Reference Guide

TL-SG3424P(config-if)# lldp me d-location civic-address language English
city London
lldp med-status
Description
The lldp med-status command is used to enable the LLDP-MED feature for the
corresponding port. After the LLDP-MED feature is enabled, the port's Admin
Status will be changed to Tx&Rx. To disable the LLDP-MED feature for the
corresponding port, please use no lldp med-status command.
Syntax
lldp med-status
no lldp med-status
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Enable the LLDP-MED feature for port 2:
TL-SG3424P(config)# interface gigabitEthernet 1/0/2
TL-SG3424P(config-if)# lldp med-status
lldp med-tlv-select
Description
The l ldp me d -tlv -sele ct command is used to configure LLDP-MED TLVs to be
included in outgoing LLDPDU for the corresponding port. To exclude LLDP-MED
TLVs, please use no lldp med-tlv -se le ct command. By default, All TLVs are
included in outgoing LLDPDU.
Syntax
lldp me d-tlv-select { [inventory-management] [location] [network-policy]
[power-management] [all] }
no lldp med-tlv-select { [inventory-management] [location] [network-policy]
[power-management] [all] }
262