CLI Reference Guide

Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Example
Exclude “network policy” and “inventory” TLVs in LLDPDU outgoing from port 2:
TL-SG3424P(config)# interface gigabitEthernet 1/0/2
TL-SG3424P(config-if)# no lldp med-tlv-select network-policy
inventory-management
show lldp
Description
The show lldp command is used to display the global configuration of LLDP and
LLDP-MED fast start repeat count number.
Syntax
show lldp
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of LLDP and LLDP-MED fast start repeat count
number:
TL-SG3424P# show lldp
show lldp interface
Description
The show lldp interface command is used to display LLDP and LLDP-MED
configuration of the corresponding port. By default, the configuration of all the
ports will be displayed.
Syntax
show lldp interface [ gigabitEthernet port ]
263