CLI Reference Guide

Example
Configure the quiet period as 100 seconds:
TL-SG3424(config)# dot1x timeout quiet-period 100
dot1x max-reauth-req
Description
The dot1x max-reauth-re q command is used to configure the maximu m
transfer times of the repeated authentication request when the server cannot be
connected. To restore to the default value, please use no dot1x max-reauth-req
command.
Syntax
dot1x max-re auth-req times
no dot1x max-re auth-req
Parameter
times ——The maximum transfer times of the repeated authentication request,
ranging from 1 to 9 in times. By default, the value is 3.
Command Mode
Global Configuration Mode
Example
Configure the maximum transfer times of the repeated authentication request as
5:
TL-SG3424(config)# dot1x max-reauth-req 5
dot1x
Description
The dot1x command is used to enable the IEEE 802.1X function for a specified
port. To disable the IEEE 802.1X function for a specified port, please use no
dot1x command.
Syntax
dot1x
no dot1x
82