User Guide

¾ Configuration Procedure

z Configure Switch A

Step Operation Description

1 Configure the

Link Type of the

ports

Required. On VLAN→802.1Q VLAN→Port Config page, configure the

link type of Port 11 and Port 12 as GENERAL and TRUNK respectively.

2 Create VLAN10 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a

VLAN with its VLANID as 10, owning Port 11 and Port 12, and configure

the egress rule of Port 11 as Untag.

3 Create VLAN20 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a

VLAN with its VLANID as 20, owning Port 11 and Port 12, and configure

the egress rule of Port 11 as Untag.

4 Configure MAC

VLAN 10

On VLAN→MAC VLAN page, create MAC VLAN10 with the MAC

address as 00-19-56-8A-4C-71.

5 Configure MAC

VLAN 20

On VLAN→MAC VLAN page, create MAC VLAN10 with the MAC

address as 00-19-56-82-3B-70.

z Configure Switch B

Step Operation Description

1 Configure the

Link Type of the

ports

Required. On VLAN→802.1Q VLAN→Port Config page, configure the

link type of Port 21 and Port 22 as GENERAL and TRUNK respectively.

2 Create VLAN10 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a

VLAN with its VLANID as 10, owning Port 21 and Port 22, and

configure the egress rule of Port 21 as Untag.

3 Create VLAN20 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a

VLAN with its VLANID as 20, owning Port 21 and Port 22, and

configure the egress rule of Port 21 as Untag.