Operation Manual

Configuration procedure:

Step Operation Description

1 Set the link type for

port.

Required. On the VLAN→802.1Q VLAN→Port Config page, set

the link type for the port basing on its connected device.

2 Create VLAN. Required. On the VLAN→802.1Q VLAN→VLAN Config page,

click the Create button to create a VLAN. Enter the VLAN ID and

the description for the VLAN. Meanwhile, specify its member ports.

3 Modify/View VLAN. Optional. On the VLAN→802.1Q VLAN→VLAN Config page,

click the Edit/Detail button to modify/view the information of the

corresponding VLAN.

4 Delete VLAN Optional. On the VLAN→802.1Q VLAN→VLAN Config page,

select the desired entry to delete the corresponding VLAN by

clicking the Delete button.

6.2 Application Example for 802.1Q VLAN

¾ Network Requirements

z Switch A is connecting to PC A and Server B;

z Switch B is connecting to PC B and Server A;

z PC A and Server A is in the same VLAN;

z PC B and Server B is in the same VLAN;

z PCs in the two VLANs cannot communicate with each other.

¾ Network Diagram