User manual

default, the Speed and Duplex mode of SFP port is 1000MFD. For TL-SL2210/TL-SL2452, the
SFP port can only be used with a gigabit module.
 LEDs
Name Status Indication
On(green) The switch is powered on.
Power
Flashing/Off The switch is powered off or power supply is abnormal.
Flashing The switch is working normally.
System
On/Off
The switch is powered off or the switch is working
abnormally.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 100Mbps.
10/100M
(10/100Mbps)
Yellow The linked device is running at 10Mbps.
On A device is linked to the corresponding port.
Flashing Data is being transmitted or received.
Green The linked device is running at 1000Mbps.
1000M
(1000Mbps)
Yellow The linked device is running at 10/100Mbps.
2.3.2 Rear Panel
The rear panel of TL-SL2210/TL-SL2218/TL-SL2428/TL-SL2452 features a power socket and a
Grounding Terminal (marked with
).
The rear panel of TL-SL2210 is shown as the following figure.
Figure 2-5 Rear Panel of TL-SL2210
The rear panel of TL-SL2218 is shown as the following figure.
Figure 2-6 Rear Panel of TL-SL2218
7