User manual

 Bandwidth Utilization
Rx: Select Rx to display the bandwidth utilization of receiving packets
on this port.
Tx: Select Tx to display the bandwidth utilization of sending packets
on this port.
4.1.2 Device Description
On this page you can configure the description of the switch, including device name, device location
and system contact.
Choose the menu Syst
em→System Info→Device Description to load the following page.
Figure 4-4 Device Description
The following entries are displayed on this screen:
 Device Description
Device Name: Enter the name of the switch.
Device Locat
ion: Enter the location of the switch.
Sy
stem Contact: Enter your contact information.
4.1.3 System Time
System Time is the time displayed while the switch is running. On this page you can configure the
system time and the settings here will be used for other time-based functions.
You can manually set the system time or synchronize with PC’s clock as the system time.
13