User manual

Step Operation Description

3 Enable IGMP

Snooping function

Enable IGMP Snooping function globally on Multicast→IGMP

Snooping→Snooping Config page. Enable IGMP Snooping

function for port 3, port 4 and port 5 on Multicast→IGMP

Snooping→Port Config page.

4 Enable Multicast

VLAN

Enable Multicast VLAN, configure the VLAN ID of a multicast

VLAN as 3 and keep the other parameters as default on

Multicast→IGMP Snooping→Multicast VLAN pa

ge.

5 Check Multicast VLAN 3-5 and Multicast VLAN 3 will be displayed in the IGMP

Snooping Status table on the Multicast→IGMP

Snooping→Snooping Config page.

8.2 Multicast IP

In a network, receivers can join different multicast groups appropriate to their needs. The switch

forwards multicast streams based on multicast address table. The Multicast IP can be

implemented on Multicast IP Table, Static Multicast IP page.

8.2.1 Multicast IP Table

On this page you can view the multicast IP table on the switch.

Choose the menu Multicast→Multicast IP→Multicast IP Table to load the following pa

ge.

Figure 8-8 Multicast IP Table

The following entries are displayed on this screen:

 Search Option

Multicast IP: Enter the multicast IP address the desired entry must carry.

VLAN ID: Enter the VLAN ID the desired entry must carry.

Port: Select the port number the desired entry must carry.

Type: Select the type the desired entry must carry.

 All: Displays all multicast IP entries.

 Static: Displays all static multicast IP entries.

 Dynamic: Displays all dynamic multicast IP entries.