User manual

Connect the Extender to the Internet
Select your router's 2.4GHz host network and enter the password, then
click Next.
Either copy the host’s SSID or customize it for the extended 2.4GHz
network, then click Next.
Verify your wireless settings and click Save. The LED should turn
solid green, indicating successful connection.
Relocate
Plug the extender into an electrical outlet about halfway between
your router (Host Network) and the Wi-Fi dead zone.
Wait about 1 minute until the LED is lit with a solid green. If not,
relocate the extender closer to the router to achieve a good (or
better) signal quality.