User manual

Appearance
 (Range Extender/WPS) Button: If your Wireless router supports WPS
function, you can press the WPS button and then press the RE button of
the extender to establish a secure connection between the wireless router
and the extender.
 RESET: This button is used to restore the extender’s factory default settings.
There are two ways to reset the extender:
Option One: While the extender is powered on, use a pin to press the
RESET button, the LED should turn off momentarily, then release the button
and wait the extender to reboot to its factory default settings.
Option Two: Log in to the extender’s web management page, and go to
Settings > System Tools > Backup & Restore page, click Factory
Restore.
 Ethernet Port: One 10/100Mbps RJ45 Ethernet ports used to add wireless
connectivity to an Ethernet-enabled device such as Internet TV, DVR,
Gaming console and so on. Please note that this port is not allowed to be
connected with router.
For safety consideration, we suggest you plug the extender right way up or
upside down, as the pictures shown below.
Right way up Upside down